ACL Race Series Connecting Rod Bushes - Subaru EJ15 and EJ16 - STD - 4B8320H-STD
The ACL Race Series 4B8320H-STD connecting rod bushes, featuring a trimetal construction, are designed for Subaru EJ15 and EJ16 engines. They guide the connecting rod top ends over the crankshaft journals and operate using the oil film that separates the moving surfaces. Part number 4B8320H-STD corresponds to the standard (STD) size.
The trimetal design combines a high-resistance steel backing, a copper-lead-tin anti-friction ply, a nickel barrier, and a lead-tin-copper surface coating. This structure helps withstand the stresses of the lower engine while maintaining the conditions necessary for oil film formation.
The H version in STD size is intended for mounting while maintaining the nominal size of the crankshaft journals. To determine the effective oil clearance, the bearings must be measured once installed and the caps tightened to the specified torque.
Technical Specifications
- Type: Connecting rod bushes
- Manufacturer: ACL
- Range: ACL Race Series
- Design: trimetal, steel backing, and copper-lead-tin anti-friction plies
- ACL Material: F781 (Race Series connecting rod bushes)
- Manufacturer part number: 4B8320H-STD
- Dimension: standard dimension (STD)
- Version: H
- Main engines: EJ15 and EJ16
- Manufacturers: Subaru
- Rod journal diameter (nominal dimension): 47.984 to 48 mm
- Connecting rod top end bore: 51 to 51.02 mm
- Maximum thickness at the top: 1.498 mm
- Maximum width: 15.63 mm
Engine configurations compatible with ACL 4B8320H-STD bearings
The engine models listed for this set include: EJ20 | EJ205/207 | EJ22 | EJ25 DOHC | EJ25 SOHC | EJ255 | EJ257 | EJ15 | EJ16 | EJ18 | EJ25 | EJ20T | EJ20TT | EJ22T | EJ25T.
Mounting Recommendations
Mounting recommendation: Measure the crankshaft journals with a micrometer, inspect the connecting rod bearings, and check the operating clearance after tightening the connecting rod caps in accordance with the engine manufacturer’s specifications.
ACL Race Series develops engine bearings for competition and tuning applications, featuring precision manufacturing, shell thickness control, and a trimetal design focused on mechanical resistance and precise control of operating clearances.
-
Thickness in mm1,50
-
Width in mm15,63
-
Engine codeEJ20 - 2.0L 16V
EJ22 - 2.2L 16V
EJ25 DOHC - 2.5L 16V
EJ25 SOHC - 2.5L 16V
EJ205/207 - 2.0L 16V
EJ255 - 2.5L 16V
EJ257 - 2.5L 16V -
Make (Engine)Subaru
-
Rod Journal Diameter in mm47,98
48,00 -
Max. connecting rod bore in mm51,02
-
Min. connecting rod bore in mm51,00