ACL Race Series Connecting Rod Bushes - Porsche 930 - STD - 6B2462HX-STD

ACL
Reference: ACL-6B2462HX-STD
Supplier Ref.: 6B2462HX-STD

Price: €108.00 Tax included
Available to order Within 20 days on average.
Unavailable in store (Montpellier)
Earn 108 loyalty points
Carbon footprint: 3 kg CO₂

ACL Race Series 6B2462HX-STD connecting rod bushes with a trimetal structure are designed for Porsche 930 engines. Installed in the connecting rod top ends, they serve as the interface between the connecting rod and the crankpin. Their selection determines the operating clearance and oiling of the lower engine. Part number 6B2462HX-STD corresponds to the standard size (STD).

ACL Race Series trimetal technology consists of a steel core and a copper-lead-tin layer protected by a nickel barrier. The assembly is completed by a surface layer designed to enhance bearing performance under load and resistance to seizure.

The HX suffix identifies a version designed to adjust the oil clearance. For the HX version, ACL specifies approximately 0.025 mm of additional clearance compared to an H version of the same size, on a crankshaft of corresponding sizes. The mounting must be checked after tightening the connecting rod caps.


Technical Specifications

  • Type: connecting rod bushes
  • Manufacturer: ACL
  • Range: ACL Race Series
  • Design: trimetal, steel backing, and copper-lead-tin anti-friction plies
  • ACL Material: F781 (Race Series connecting rod bushes)
  • Manufacturer part number: 6B2462HX-STD
  • Specification: standard specification (STD)
  • Version: HX, increased oil clearance compared to the corresponding H version
  • Main engines: 930
  • Manufacturers: Porsche
  • Rod journal diameter (nominal dimension): 52.971 to 52.99 mm
  • Connecting rod top end bore: 56 to 56.019 mm
  • Maximum thickness at the top: 1.477 mm
  • Maximum width: 17.8 mm

Engine models compatible with ACL 6B2462HX-STD bearings

The engine models listed for this set include: 930 | 930 Turbo.

Mounting Recommendations

Mounting recommendation: Check the surface condition of the crankshaft, measure the diameters of the crankpins, and measure the oil clearance with the half-bearings installed. Follow the engine tightening procedure.

ACL Race Series develops engine bearings for competition and performance applications, featuring precision manufacturing, shell thickness control, and a trimetal design focused on mechanical strength and precise control of operating clearances.

  • Thickness in mm
    1,48
  • Width in mm
    17,80
  • Engine code
    930 - 3.0L 12V
    930 - 3.2L 12V
    930 Turbo - 3.0L 12V
  • Make (Engine)
    Porsche
  • Rod Journal Diameter in mm
    52,97
    52,99
  • Max. connecting rod bore in mm
    56,02
  • Min. connecting rod bore in mm
    56,00

16 other products in the same category: