ACL Race Series Connecting Rod Bushes - Mitsubishi 6G72, 6G72T, and 6G73 - 0.025 mm - 6B1140H-.025
ACL Race Series 6B1140H-.025 trimetal connecting rod bushes are designed for Mitsubishi 6G72, 6G72T, and 6G73 engines. These half-bushes help guide the connecting rod top end and form the oil film essential for bearing operation. Part number 6B1140H-.025 corresponds to a thickness of 0.025 mm.
The trimetal structure of ACL Race Series bearings features a high-resistance steel base, a copper-lead-tin functional ply, and a surface finish based on a lead-tin-copper alloy, with a nickel barrier layer in between. This design ensures the bearing’s mechanical strength and reliable operation under severe conditions.
This 0.025 mm size option allows you to select bearings that match the actual condition of the crankpins. The selection should be based on measurements of the crankshaft and not solely on the engine’s preparation level.
Technical Specifications
- Type: Connecting rod bush
- Manufacturer: ACL
- Range: ACL Race Series
- Design: trimetal, steel backing, and copper-lead-tin anti-friction plies
- ACL Material: F781 (Race Series connecting rod bushes)
- Manufacturer part number: 6B1140H-.025
- Thickness: 0.025 mm
- Version: H
- Main engines: 6G72, 6G72T, and 6G73
- Manufacturers: Mitsubishi
Engine models compatible with ACL 6B1140H-.025 bearings
The engine models listed for this set include: 6G72 | 6G72T | 6G73.
Mounting Recommendations
Mounting recommendation: Select the size based on crankshaft measurements; then check the assembled bore with the bearing cap tightened to the specified torque. Oiling of the bearing depends on the resulting clearance. A repair size should only be installed if the corresponding machining has been performed.
ACL Race Series develops engine bearings for competition and tuning applications, featuring precision manufacturing, shell thickness control, and a trimetal design focused on mechanical resistance and control of operating clearances.
-
Thickness in mm1,50
-
Width in mm15,50
-
Make (Engine)Mitsubishi
-
Rod Journal Diameter in mm49,96
49,98 -
Max. connecting rod bore in mm53,02
-
Min. connecting rod bore in mm53,00