ACL Race Series Connecting Rod Bushes - BMW S65B40 - STD - 8B1580HX-STD
ACL Race Series 8B1580HX-STD connecting rod bushes with a trimetal structure are designed for BMW S65B40 engines. They guide the connecting rod top ends on the crankshaft journals and operate using the oil film that separates the moving surfaces. Part number 8B1580HX-STD corresponds to the standard (STD) specification.
The trimetal design combines a high-strength steel backing, a copper-lead-tin anti-friction layer, a nickel barrier, and a lead-tin-copper surface coating. This structure helps withstand the stresses of the lower engine while maintaining the conditions necessary for oil film formation.
The HX suffix identifies a version designed to adjust the oil clearance. For the HX version, ACL specifies approximately 0.025 mm of additional clearance compared to an H version of the same size, on a crankshaft of corresponding sizes. The mounting must be checked after the connecting rod caps are tightened.
Technical Specifications
- Type: connecting rod bush
- Manufacturer: ACL
- Range: ACL Race Series
- Design: trimetal, steel backing, and copper-lead-tin anti-friction plies
- ACL Material: F781 (Race Series connecting rod bushes)
- Manufacturer part number: 8B1580HX-STD
- Dimension: standard dimension (STD)
- Version: HX, increased oil clearance compared to the corresponding H version
- Main engines: S65B40
- Manufacturers: BMW
- Rod journal diameter (nominal dimension): 51.975 to 51.991 mm
- Connecting rod top end bore: 56 to 56.013 mm
- Maximum thickness at the top: 1.985 mm
- Maximum width: 15.9 mm
Engine models compatible with ACL 8B1580HX-STD bearings
The engine models listed for this set include: S65B40.
Mounting Recommendations
Mounting recommendation: Measure the crankshaft journals with a micrometer, inspect the connecting rod bearings, and check the operating clearance after tightening the connecting rod caps in accordance with the engine manufacturer’s specifications.
ACL Race Series develops engine bearings for competition and tuning applications, featuring precision manufacturing, shell thickness control, and a trimetal design optimized for mechanical resistance and precise control of operating clearances.
-
Thickness in mm1,99
-
Width in mm15,90
-
Engine codeS65B40 - 4.0L 32V
-
Make (Engine)BMW
-
Rod Journal Diameter in mm51,98
51,99 -
Max. connecting rod bore in mm56,01
-
Min. connecting rod bore in mm56,00