Très bon produit et de bonne qualité
ACL Race Series Connecting Rod Bushes - Peugeot and Citroën TU5JP4, TU5JP, and TU3JP - STD - 4B7712HX-STD
The ACL Race Series 4B7712HX-STD connecting rod bushes, featuring a trimetal construction, are designed for Peugeot and Citroën TU5JP4, TU5JP, and TU3JP engines. In the lower engine, they allow the connecting rods to rotate around the crankpins while supporting the loads transmitted by the pistons. Part number 4B7712HX-STD corresponds to the standard size (STD).
Developed to withstand the stresses of engine tuning, ACL Race Series trimetal bearings combine a steel bracket, a copper-lead-tin alloy, a nickel barrier, and an anti-friction ply. Their radial runout helps maintain the oil film when the housings undergo deformation during operation.
The HX suffix identifies a version designed to adjust the oil clearance. For the HX version, ACL specifies approximately 0.025 mm of additional clearance compared to an H version of the same size, on a crankshaft of corresponding sizes. The mounting must be checked after tightening the connecting rod caps.
Technical Specifications
- Type: connecting rod bush
- Manufacturer: ACL
- Range: ACL Race Series
- Design: trimetal, steel backing, and copper-lead-tin anti-friction plies
- ACL Material: F781 (Race Series connecting rod bushes)
- Manufacturer part number: 4B7712HX-STD
- Specification: standard specification (STD)
- Version: HX, increased oil clearance compared to the corresponding H version
- Main engines: TU5JP4, TU5JP, and TU3JP
- Manufacturers: Peugeot | Citroën
- Rod journal diameter (nominal dimension): 44.975 to 44.991 mm
- Connecting rod top end bore: 48.655 to 48.671 mm
- Maximum thickness at the top: 1.807 mm
- Maximum width: 19.75 mm
Engine models compatible with ACL 4B7712HX-STD bearings
This part number applies specifically to the following engine models in the described family: TU5JP4 | TU5J2 | XU5JA | XV3 | XV5 | XV8 | TU3.2 | TU3J2 | TU5JP | TU1 | TU2.4 | TU2J2 | XW3 | XW7 | TU3A | TU3CP | TU3M | TU3S | XY6 | XY7. The list of engine codes and applications must be cross-referenced with the exact mounting configuration before placing an order.
Mounting Recommendations
Mounting Recommendation: Before assembly, verify the geometry of the connecting rod top ends, the actual dimensions of the crankshaft journals, and the final oil clearance. Apply the torque values and follow the tightening sequence specified for the engine.
ACL Race Series develops engine bearings for competition and tuning, featuring precision manufacturing, shell thickness control, and a trimetal design focused on mechanical strength and control of operating clearances.
-
Thickness in mm1,81
-
Width in mm19,75
-
Engine codeTU5J2 - 1.6L 8V
TU5JP4 - 1.6L 16V
XU5JA - 1.6L 8V -
Make (Engine)Citroën
Peugeot -
Rod Journal Diameter in mm44,98
44,99 -
Max. connecting rod bore in mm48,67
-
Min. connecting rod bore in mm48,66