Bien
ACL Race Series Connecting Rod Bushes - Peugeot and Citroën XU9, XU10, and XU10J2 - STD - 4B7700H-STD
The ACL Race Series 4B7700H-STD connecting rod bushes, featuring a trimetal construction, are designed for Peugeot and Citroën XU9, XU10, and XU10J2 engines. Installed in the connecting rod top ends, they serve as the interface between the connecting rod and the crankpin. Their selection determines the operating clearance and oiling of the lower engine assembly. Part number 4B7700H-STD corresponds to the standard size (STD).
ACL Race Series trimetal technology consists of a steel base and a copper-lead-tin layer protected by a nickel barrier. The assembly is completed by a surface layer designed to enhance bearing performance under load and resistance to seizure.
The H version in STD size is intended for mounting while maintaining the nominal size of the crankshaft journals. To determine the actual oil clearance, measure the bearings once they are installed and the caps are tightened to the specified torque.
Technical Specifications
- Type: Connecting rod bush
- Manufacturer: ACL
- Range: ACL Race Series
- Design: trimetal, steel backing, and copper-lead-tin anti-friction plies
- ACL Material: F781 (Race Series connecting rod bushes)
- Manufacturer part number: 4B7700H-STD
- Dimension: standard dimension (STD)
- Version: H
- Main engines: XU9, XU10, and XU10J2
- Manufacturers: Peugeot | Citroën
- Rod journal diameter (nominal dimension): 49.984 to 50 mm
- Connecting rod top end bore: 53.695 to 53.708 mm
- Maximum thickness at the top: 1.834 mm
- Maximum width: 20.25 mm
Engine models compatible with ACL 4B7700H-STD bearings
The engine models listed for this set include: XU9 | XU10 | XU10J2 | XU10J4 | XU10M.
Mounting Recommendations
Mounting recommendation: Check the surface condition of the crankshaft, measure the diameters of the crankpins, and measure the oil clearance with the half-bearings installed. Follow the engine tightening procedure.
ACL Race Series develops engine bearings for racing and tuning applications, featuring precision manufacturing, shell thickness control, and a trimetal design focused on mechanical resistance and precise control of operating clearances.
-
Thickness in mm1,83
-
Width in mm20,25
-
Make (Engine)Citroën
Peugeot -
Rod Journal Diameter in mm49,98
50,00 -
Max. connecting rod bore in mm53,71
-
Min. connecting rod bore in mm53,70
-
5 ★
1
-
4 ★
1
-
3 ★
0
-
2 ★
0
-
1 ★
0
Très bon produit
Published on 18/12/2025 by Sébastien L