ACL Race Series Connecting Rod Bushes - Nissan VQ35DE - 0.25 mm - 6B2640H-0.25
The ACL Race Series 6B2640H-0.25 trimetal connecting rod bushes are designed for Nissan VQ35DE engines. In the lower engine, they allow the connecting rods to rotate around the crankpins while supporting the loads transmitted by the pistons. Part number 6B2640H-0.25 corresponds to a thickness of 0.25 mm.
Developed to withstand the stresses of engine tuning, ACL Race Series trimetal bearings combine a steel backing, a copper-lead-tin alloy, a nickel barrier, and an anti-friction layer. Their radial runout helps maintain the oil film when the bearing seats undergo deformation during operation.
This 0.25 mm version allows you to select bearings that match the actual condition of the crankpins. The selection should be based on crankshaft measurements and not solely on the engine’s tuning level.
Technical Specifications
- Type: connecting rod bushes
- Manufacturer: ACL
- Range: ACL Race Series
- Design: trimetal, steel backing, and copper-lead-tin anti-friction plies
- ACL Material: F781 (Race Series connecting rod bushes)
- Manufacturer part number: 6B2640H-0.25
- Thickness: 0.25 mm
- Version: H
- Main engines: VQ35DE
- Manufacturers: Nissan
Engine models compatible with ACL 6B2640H-0.25 bearings
The engine models listed for this set include: VQ35DE.
Mounting Recommendations
Mounting recommendation: Before assembly, check the geometry of the connecting rod top ends, the actual dimension of the crankshaft journals, and the final oil clearance. Apply the torque values and follow the tightening sequence specified for the engine. A repair size should only be installed if the corresponding machining has been performed.
ACL Race Series develops engine bearings for competition and tuning applications, featuring precision manufacturing, shell thickness control, and a trimetal design focused on mechanical resistance and control of operating clearances.
-
Thickness in mm1,63
-
Width in mm17,00
-
Engine codeVQ35DE - 3.5L 24V
-
Make (Engine)Nissan
-
Rod Journal Diameter in mm51,71
51,73 -
Max. connecting rod bore in mm55,01
-
Min. connecting rod bore in mm55,00