ACL Race Series Connecting Rod Bushes - Toyota 2ZZ and 2ZZ-GE - 0.25 mm - 4B1856H-.25
The ACL Race Series 4B1856H-.25 trimetal connecting rod bushes are designed for Toyota 2ZZ and 2ZZ-GE engines. In the lower engine, they allow the connecting rods to rotate around the crankpins while supporting the loads transmitted by the pistons. Part number 4B1856H-.25 corresponds to a thickness of 0.25 mm.
Developed to withstand the stresses of engine tuning, the ACL Race Series trimetal connecting rod bearings combine a steel bracket, a copper-lead-tin alloy, a nickel barrier, and an anti-friction layer. Their radial runout helps maintain the oil film when the bearing seats undergo deformation during operation.
This 0.25 mm version allows you to select bearings that match the actual condition of the crankshaft journals. The selection should be based on crankshaft measurements, not solely on the level of engine tuning.
Technical Specifications
- Type: connecting rod bushes
- Manufacturer: ACL
- Range: ACL Race Series
- Design: trimetal, steel backing, and copper-lead-tin anti-friction plies
- ACL Material: F781 (Race Series connecting rod bushes)
- Manufacturer Part Number: 4B1856H-.25
- Thickness: 0.25 mm
- Version: H
- Main engines: 2ZZ and 2ZZ-GE
- Manufacturers: Toyota
Engine models compatible with ACL 4B1856H-.25 bearings
The engine types listed for this set include: 2ZZ | 2ZZ-GE.
Mounting Recommendations
Mounting recommendation: Before assembly, check the geometry of the connecting rod top ends, the actual dimension of the crankshaft journals, and the final oil clearance. Apply the torque values and follow the tightening sequence specified for the engine. A repair size should only be installed if the corresponding machining has been performed.
ACL Race Series develops engine bearings for racing and performance applications, featuring precision manufacturing, shell thickness control, and a trimetal design focused on mechanical resistance and control of operating clearances.
-
Thickness in mm1,62
-
Width in mm16,00
-
Engine code2ZZ - 1.8L 16V
-
Make (Engine)Toyota
-
Rod Journal Diameter in mm44,74
44,75 -
Max. connecting rod bore in mm48,02
-
Min. connecting rod bore in mm48,00