ACL Race Series Connecting Rod Bushes - Honda and Acura B20A, B21A, and B21A1 - STD - 4B1936HX-STD
The ACL Race Series 4B1936HX-STD connecting rod bushes with a trimetal structure are designed for Honda and Acura B20A, B21A, and B21A1 engines. These bush halves help guide the connecting rod top end and form the oil film essential for bearing operation. Part number 4B1936HX-STD corresponds to the standard size (STD).
The trimetal construction of ACL Race Series bearings features a high-resistance steel base, a copper-lead-tin functional layer, and a surface finish based on a lead-tin-copper alloy, with a nickel barrier layer in between. This design ensures mechanical strength and bearing performance under severe conditions.
The HX suffix identifies a version designed to adjust the oil clearance. For the HX version, ACL specifies approximately 0.025 mm of additional clearance compared to an H version of the same size, on a crankshaft of corresponding sizes. The mounting must be checked after tightening the connecting rod caps.
Technical Specifications
- Type: connecting rod bushes
- Manufacturer: ACL
- Range: ACL Race Series
- Design: trimetal, steel backing, and copper-lead-tin anti-friction plies
- ACL Material: F781 (Race Series connecting rod bushes)
- Manufacturer Part Number: 4B1936HX-STD
- Dimension: standard dimension (STD)
- Version: HX, increased oil clearance compared to the corresponding H version
- Main engines: B20A, B21A, and B21A1
- Manufacturers: Honda | Acura
- Rod journal diameter (nominal dimension): 47.98 to 48 mm
- Connecting rod top end bore: 51.004 to 51.024 mm
- Maximum thickness at the top: 1.483 mm
- Maximum width: 19.4 mm
Engine models compatible with ACL 4B1936HX-STD bearings
The engine models listed for this set include: B20A | B21A | B21A1 | F20A | F22A | F22B.
Mounting Recommendations
Mounting recommendation: Select the size based on crankshaft measurements; then check the assembled bore with the cap tightened to the specified torque. Cankshaft bearing oiling depends on the resulting clearance.
ACL Race Series develops engine bearings for competition and tuning, featuring precision manufacturing, shell thickness control, and a trimetal design focused on mechanical resistance and control of operating clearances.
-
Thickness in mm1,48
-
Width in mm19,40
-
Make (Engine)Acura
Honda -
Rod Journal Diameter in mm47,98
48,00 -
Max. connecting rod bore in mm51,02
-
Min. connecting rod bore in mm51,00