materiale ok
ACL Race Series Connecting Rod Bushes - Renault F7R - STD - 4B7820H-STD
ACL Race Series 4B7820H-STD connecting rod bushes with a trimetal structure are designed for Renault F7R engines. These half-bearings help guide the connecting rod top end and form the oil film essential for bearing operation. The part number 4B7820H-STD corresponds to the standard size (STD).
The trimetal structure of the ACL Race Series bearings consists of a high-resistance steel base, a copper-lead-tin functional layer, and a surface finish based on a lead-tin-copper alloy, with a nickel barrier layer in between. It is designed to ensure the mechanical integrity and proper operation of the bearing under severe conditions.
The H version in STD size is intended for mounting while maintaining the nominal size of the crankshaft journals. To determine the effective oil clearance, the bearings must be measured once installed and the caps tightened to the prescribed torque.
Technical Specifications
- Type: Connecting rod bush
- Manufacturer: ACL
- Range: ACL Race Series
- Design: trimetal, steel backing, and copper-lead-tin anti-friction plies
- ACL Material: F781 (Race Series connecting rod bushes)
- Manufacturer part number: 4B7820H-STD
- Dimension: standard dimension (STD)
- Version: H
- Main engines: F7R
- Manufacturers: Renault
- Rod journal diameter (nominal dimension): 48 to 48.02 mm
- Connecting rod top end bore: 51.587 to 51.6 mm
- Maximum thickness at the top: 1.768 mm
- Maximum width: 20.5 mm
Engine configurations compatible with ACL 4B7820H-STD bearings
The engine models listed for this set include: F7P | F4R 730 | F4R 732 | F4R 830 | F4R 832 | F4Rt 776 | F4Rt 874 | F7R | F7RR | F1N | F2N | F2R | F3N | F3P | F3R | F8M | F8Q.
Mounting Recommendations
Mounting recommendation: Select the size based on crankshaft measurements; then check the assembled bore with the cap tightened to the specified torque. Bearing oiling depends on the resulting clearance.
ACL Race Series develops engine bearings for competition and tuning, featuring precision manufacturing, shell thickness control, and a trimetal design focused on mechanical resistance and precise control of operating clearances.
-
Thickness in mm1,77
-
Width in mm20,5
-
Engine codeF4R 730/732 - 2.0L 16V
F4R 830/832 - 2.0L 16V
F4Rt 776/874 - 2.0L 16V
F7P - 1.8L 16V
F7R - 2.0L 16V
F7RR - 2.0L 16V -
Make (Engine)Renault
-
Rod Journal Diameter in mm48,00
48,02 -
Max. connecting rod bore in mm51,60
-
Min. connecting rod bore in mm51,59
Aussitôt commandé aussitôt reçu
bien