ACL Race Series Connecting Rod Bushes - Suzuki - STD - 4B8430HX-STD
The ACL Race Series 4B8430HX-STD connecting rod bushes, featuring a trimetal construction, are designed for Suzuki engines compatible with this family of bearings. These half-bearings help guide the connecting rod top end and form the oil film essential for the bearing’s operation. Part number 4B8430HX-STD corresponds to the standard size (STD).
The trimetal structure of the ACL Race Series bearings features a high-resistance steel base, a copper-lead-tin functional layer, and a surface finish based on a lead-tin-copper alloy, with a nickel barrier layer in between. It is designed to ensure the mechanical strength and proper operation of the bearing under severe conditions.
The HX suffix identifies a version designed to adjust the oil clearance. For the HX version, ACL specifies approximately 0.025 mm of additional clearance compared to an H version of the same size, on a crankshaft of corresponding sizes. The mounting must be checked after the connecting rod caps are tightened.
Technical Specifications
- Type: connecting rod bushes
- Manufacturer: ACL
- Range: ACL Race Series
- Design: trimetal, steel backing, and copper-lead-tin anti-friction plies
- ACL Material: F781 (Race Series connecting rod bushes)
- Manufacturer Part Number: 4B8430HX-STD
- Dimension: standard dimension (STD)
- Version: HX, increased oil clearance compared to the corresponding H version
- Manufacturers: Suzuki
- Rod journal diameter (nominal dimension): 34.976 to 35 mm
- Connecting rod top end bore: 38 to 38.016 mm
- Maximum thickness at the top: 1.475 mm
- Maximum width: 15 mm
Engine Application
Verify that the engine type and crankshaft configuration match the specified part number before mounting.
Mounting Recommendations
Mounting recommendation: Select the size based on the crankshaft measurements; then check the assembled bore with the bearing cap tightened to the specified torque. Oiling of the bearing depends on the resulting clearance.
ACL Race Series develops engine bearings for competition and tuning applications, featuring precision manufacturing, shell thickness control, and a trimetal design focused on mechanical strength and precise control of operating clearances.
-
Thickness in mm1,48
-
Width in mm15,00
-
Make (Engine)Suzuki
-
Rod Journal Diameter in mm34,98
35,00 -
Max. connecting rod bore in mm38,02
-
Min. connecting rod bore in mm38,00