ACL Race Series Connecting Rod Bushes - Ford and Mazda EcoBoost - STD - 4B8172H-STD
ACL Race Series 4B8172H-STD connecting rod bushes with a trimetal structure are designed for Ford and Mazda EcoBoost engines. These half-bearings help guide the connecting rod top end and form the oil film essential for bearing operation. The part number 4B8172H-STD corresponds to the standard size (STD).
The trimetal construction of the ACL Race Series bearings features a high-resistance steel base, a copper-lead-tin functional layer, and a surface finish based on a lead-tin-copper alloy, with a nickel barrier layer in between. This design is intended to ensure mechanical strength and bearing performance under severe conditions.
The H version in STD size is intended for mounting while maintaining the nominal size of the crankshaft journals. To determine the effective oil clearance, the bearings must be measured once installed and the caps tightened to the specified torque.
Technical Specifications
- Type: Connecting rod bush
- Manufacturer: ACL
- Range: ACL Race Series
- Design: trimetal, steel backing, and copper-lead-tin anti-friction plies
- ACL Material: F781 (Race Series connecting rod bushes)
- Manufacturer part number: 4B8172H-STD
- Dimension: standard dimension (STD)
- Version: H
- Main engines: EcoBoost
- Manufacturers: Ford | Mazda
- Rod journal diameter (nominal dimension): 51.98 to 52 mm
- Connecting rod top end bore: 55.021 to 55.034 mm
- Maximum thickness at the top: 1.5 mm
- Maximum width: 17 mm
Engine types compatible with ACL 4B8172H-STD bearings
The engine types listed for this set include: EcoBoost | L3-VDT.
Mounting Recommendations
Mounting recommendation: Select the size based on crankshaft measurements; then check the assembled bore with the cap tightened to the specified torque. Bearing oiling depends on the resulting clearance.
ACL Race Series develops engine bearings for competition and performance applications, featuring precision manufacturing, shell thickness control, and a trimetal design focused on mechanical resistance and precise control of operating clearances.
-
Thickness in mm1,50
-
Width in mm17,00
-
Engine codeEcoBoost - 2.0L 16V
EcoBoost - 2.3L 16V -
Make (Engine)Ford
Mazda -
Rod Journal Diameter in mm51,98
52,00 -
Max. connecting rod bore in mm55,03
-
Min. connecting rod bore in mm55,02