ACL Race Series Connecting Rod Bushes - Peugeot and Citroën EW7, EW10, and EW12 - STD - 4B7736H-STD
ACL Race Series 4B7736H-STD connecting rod bushes with a trimetal structure are designed for Peugeot and Citroën EW7, EW10, and EW12 engines. They guide the connecting rod top ends on the crankshaft journals and operate using the oil film that separates the moving surfaces. Part number 4B7736H-STD corresponds to the standard size (STD).
The trimetal design combines a high-strength steel backing, a copper-lead-tin anti-friction ply, a nickel barrier, and a lead-tin-copper surface coating. This structure helps withstand the stresses of the lower engine while maintaining the conditions necessary for oil film formation.
The H version in STD size is intended for mounting while maintaining the nominal size of the crankshaft journals. To determine the effective oil clearance, the bearings must be measured once installed and the caps tightened to the prescribed torque.
Technical Specifications
- Type: Connecting rod bush
- Manufacturer: ACL
- Range: ACL Race Series
- Design: trimetal, steel backing, and copper-lead-tin anti-friction plies
- ACL Material: F781 (Race Series connecting rod bushes)
- Manufacturer Part Number: 4B7736H-STD
- Dimension: standard dimension (STD)
- Version: H
- Main engines: EW7, EW10, and EW12
- Manufacturers: Peugeot | Citroën
- Rod journal diameter (nominal dimension): 44.975 to 44.991 mm
- Connecting rod top end bore: 48.655 to 48.671 mm
- Maximum thickness at the top: 1.821 mm
- Maximum width: 22.5 mm
Engine models compatible with ACL 4B7736H-STD bearings
The engine models listed for this set include: EW10J4 | EW7 | EW10 | EW12 | XU7JB | XU7JP | XU7JP4.
Mounting Recommendations
Mounting recommendation: Measure the crankshaft journals with a micrometer, inspect the connecting rod bearings, and check the operating clearance after tightening the connecting rod caps in accordance with the engine manufacturer’s specifications.
ACL Race Series develops engine bearings for competition and tuning applications, featuring precision manufacturing, shell thickness control, and a trimetal design focused on mechanical strength and precise control of operating clearances.
-
Thickness in mm1,82
-
Width in mm22,50
-
Engine codeEW10J4 - 2.0L 16V
-
Make (Engine)Citroën
Peugeot -
Rod Journal Diameter in mm44,98
44,99 -
Max. connecting rod bore in mm48,67
-
Min. connecting rod bore in mm48,66