ACL Race Series Connecting Rod Bushes - Ford DURATEC - STD - 4B7267H-STD
ACL Race Series 4B7267H-STD trimetal connecting rod bushes are designed for Ford DURATEC engines. In the lower engine, they allow the connecting rods to rotate around the crankpins while supporting the loads transmitted by the pistons. The part number 4B7267H-STD corresponds to the standard size (STD).
Developed to withstand the stresses of engine tuning, ACL Race Series trimetal connecting rod bearings combine a steel bracket, a copper-lead-tin alloy, a nickel barrier, and an anti-friction ply. Their radial runout helps maintain the oil film when the bearing seats undergo deformation during operation.
The H version in STD size is intended for mounting while maintaining the nominal size of the crankshaft journals. To determine the actual oil clearance, measure the bearings once they are installed and the caps are tightened to the specified torque.
Technical Specifications
- Type: Connecting rod bushes
- Manufacturer: ACL
- Range: ACL Race Series
- Design: trimetal, steel backing, and copper-lead-tin anti-friction plies
- ACL Material: F781 (Race Series connecting rod bushes)
- Manufacturer Part Number: 4B7267H-STD
- Dimension: standard dimension (STD)
- Version: H
- Main engines: DURATEC
- Manufacturers: Ford
- Rod journal diameter (nominal dimension): 43.985 to 44 mm
- Connecting rod top end bore: 47.035 to 47.045 mm
- Maximum thickness at the top: 1.516 mm
- Maximum width: 15.3 mm
Engine types compatible with ACL 4B7267H-STD bearings
The engine types listed for this set include: EcoBoost | DURATEC.
Mounting Recommendations
Mounting recommendation: Before assembly, check the geometry of the connecting rod top ends, the actual dimension of the crankshaft journals, and the final oil clearance. Apply the torque values and follow the tightening sequence specified for the engine.
ACL Race Series develops engine bearings for competition and performance applications, featuring precision manufacturing, controlled shell thickness, and a trimetal design optimized for mechanical resistance and precise control of operating clearances.
-
Thickness in mm1,52
-
Width in mm15,30
-
Engine codeEcoBoost - 1.6L 16V
-
Make (Engine)Ford
-
Rod Journal Diameter in mm43,99
44,00 -
Max. connecting rod bore in mm47,05
-
Min. connecting rod bore in mm47,04