ACL Race Series Connecting Rod Bushes - Subaru EJ15 and EJ16 - STD - 4B8296HX-STD
The ACL Race Series 4B8296HX-STD connecting rod bushes, featuring a trimetal construction, are designed for Subaru EJ15 and EJ16 engines. In the lower engine, they allow the connecting rods to rotate around the crankpins while supporting the loads transmitted by the pistons. Part number 4B8296HX-STD corresponds to the standard size (STD).
Developed to withstand the stresses of engine tuning, ACL Race Series trimetal bearings combine a steel bracket, a copper-lead-tin alloy, a nickel barrier, and an anti-friction layer. Their radial runout helps maintain the oil film when the bearing seats undergo deformation during operation.
The HX suffix identifies a version designed to adjust the oil clearance. For the HX version, ACL specifies approximately 0.025 mm of additional clearance compared to an H version of the same size, on a crankshaft of corresponding sizes. The mounting must be checked after tightening the connecting rod caps.
Technical Specifications
- Type: connecting rod bushes
- Manufacturer: ACL
- Range: ACL Race Series
- Design: trimetal, steel backing, and copper-lead-tin anti-friction plies
- ACL Material: F781 (Race Series connecting rod bushes)
- Manufacturer part number: 4B8296HX-STD
- Dimension: standard dimension (STD)
- Version: HX, increased oil clearance compared to the corresponding H version
- Main engines: EJ15 and EJ16
- Manufacturers: Subaru
- Rod journal diameter (nominal dimension): 51.984 to 52 mm
- Connecting rod top end bore: 55 to 55.02 mm
- Maximum thickness at the top: 1.487 mm
- Maximum width: 16.5 mm
Engine configurations compatible with ACL 4B8296HX-STD bearings
The engine models listed for this set include: EJ20 | EJ205/207 | EJ22 | EJ25 DOHC | EJ25 SOHC | EJ255 | EJ257 | EJ15 | EJ16 | EJ18 | EJ25 | EJ20T | EJ20TT | EJ22T | EJ25T.
Mounting Recommendations
Mounting Recommendation: Before assembly, check the geometry of the connecting rod top ends, the actual dimension of the crankshaft journals, and the final oil clearance. Apply the torque values and follow the tightening sequence specified for the engine.
ACL Race Series develops engine bearings for competition and tuning applications, featuring precision manufacturing, shell thickness control, and a trimetal design focused on mechanical strength and precise control of operating clearances.
-
Thickness in mm1,49
-
Width in mm16,50
-
Engine codeEJ20 - 2.0L 16V
EJ22 - 2.2L 16V
EJ25 DOHC - 2.5L 16V
EJ25 SOHC - 2.5L 16V
EJ205/207 - 2.0L 16V
EJ255 - 2.5L 16V
EJ257 - 2.5L 16V -
Make (Engine)Subaru
-
Rod Journal Diameter in mm51,98
52,00 -
Max. connecting rod bore in mm55,02
-
Min. connecting rod bore in mm55,00