ACL Race Series Connecting Rod Bushes - Toyota 2RZ, 3RZ, and 1RZ - STD - 4B8376H-STD

ACL
Reference: ACL-4B8376H-STD
Supplier Ref.: 4B8376H-STD

Price: €71.00 Tax included
Available to order Within 20 days on average.
Unavailable in store (Montpellier)
Earn 71 loyalty points
Carbon footprint: 2.34 kg CO₂

ACL Race Series 4B8376H-STD connecting rod bushes with a trimetal construction are designed for Toyota 2RZ, 3RZ, and 1RZ engines. Installed in the connecting rod top ends, they serve as the interface between the connecting rod and the crankpin. Their selection determines the operating clearance and oiling of the lower engine. Part number 4B8376H-STD corresponds to the standard size (STD).

ACL Race Series trimetal technology consists of a steel base and a copper-lead-tin layer protected by a nickel barrier. The assembly is completed by a surface layer designed to enhance bearing performance under load and resistance to seizure.

The H version in STD size is intended for mounting while maintaining the nominal size of the crankshaft journals. To determine the actual oil clearance, measure the bearings once they are installed and the caps are tightened to the specified torque.


Technical Specifications

  • Type: Connecting rod bush
  • Manufacturer: ACL
  • Range: ACL Race Series
  • Design: trimetal, steel backing, and copper-lead-tin anti-friction plies
  • ACL Material: F781 (Race Series connecting rod bushes)
  • Manufacturer part number: 4B8376H-STD
  • Dimension: standard dimension (STD)
  • Version: H
  • Main engines: 2RZ, 3RZ, and 1RZ
  • Manufacturers: Toyota
  • Rod journal diameter (nominal dimension): 52.987 to 53 mm
  • Connecting rod top end bore: 56 to 56.024 mm
  • Maximum thickness at the top: 1.485 mm
  • Maximum width: 19.83 mm

Engine models compatible with ACL 4B8376H-STD bearings

The engine models listed for this set include: 2RZ | 3RZ | 1RZ | 2TZ.

Mounting Recommendations

Mounting recommendation: Check the surface condition of the crankshaft, measure the diameters of the crankpins, and measure the oil clearance with the half-bearings installed. Follow the engine tightening procedure.

ACL Race Series develops engine bearings for competition and tuning, featuring precision manufacturing, shell thickness control, and a trimetal design focused on mechanical resistance and precise control of operating clearances.

  • Thickness in mm
    1,49
  • Width in mm
    19,83
  • Engine code
    2RZ - 2.4L 16V
    3RZ - 2.7L 16V
  • Make (Engine)
    Toyota
  • Rod Journal Diameter in mm
    52,99
    53,00
  • Max. connecting rod bore in mm
    56,02
  • Min. connecting rod bore in mm
    56,00

16 other products in the same category: