ACL Race Series Connecting Rod Bushes - Nissan VK45, VK50, and VK56 - STD - 8B2990H-STD

ACL
Reference: ACL-8B2990H-STD
Supplier Ref.: 8B2990H-STD

Price: €252.00 Tax included
Available to order Within 20 days on average.
Unavailable in store (Montpellier)
Earn 252 loyalty points (that is €5.00 in vouchers)
Carbon footprint: 2.34 kg CO₂

The ACL Race Series 8B2990H-STD connecting rod bushes with a trimetal structure are designed for Nissan VK45, VK50, and VK56 engines. These half-bearings help guide the connecting rod top end and form the oil film essential for the bearing’s operation. Part number 8B2990H-STD corresponds to the standard size (STD).

The trimetal construction of the ACL Race Series bearings features a high-resistance steel base, a copper-lead-tin functional ply, and a surface finish based on a lead-tin-copper alloy, with an interposed nickel barrier. This design ensures mechanical strength and bearing performance under severe conditions.

The H version in STD size is intended for mounting while maintaining the nominal size of the crankshaft journals. To determine the effective oil clearance, the bearings must be measured once installed and the caps tightened to the prescribed torque.


Technical Specifications

  • Type: Connecting rod bush
  • Manufacturer: ACL
  • Range: ACL Race Series
  • Design: trimetal, steel backing, and copper-lead-tin anti-friction plies
  • ACL Material: F781 (Race Series connecting rod bushes)
  • Manufacturer part number: 8B2990H-STD
  • Dimension: standard dimension (STD)
  • Version: H
  • Main engines: VK45, VK50, and VK56
  • Manufacturers: Nissan
  • Rod journal diameter (nominal dimension): 53.962 to 53.974 mm
  • Connecting rod top end bore: 57 to 57.013 mm
  • Maximum thickness at the top: 1.508 mm
  • Maximum width: 18.3 mm

Engine models compatible with ACL 8B2990H-STD bearings

The engine models listed for this set include: VK45 | VK50 | VK56.

Mounting Recommendations

Mounting recommendation: Select the size based on crankshaft measurements; then check the assembled bore with the cap tightened to the specified torque. Bearing oiling depends on the resulting clearance.

ACL Race Series develops engine bearings for competition and tuning, featuring precision manufacturing, shell thickness control, and a trimetal design focused on mechanical resistance and precise control of operating clearances.

  • Thickness in mm
    1,5
  • Width in mm
    18,30
  • Make (Engine)
    Nissan
  • Rod Journal Diameter in mm
    53,96
    53,97
  • Max. connecting rod bore in mm
    57,01
  • Min. connecting rod bore in mm
    57,00

16 other products in the same category: