ACL Connecting Rod Bushes - Honda and Acura D15B, D15Z, and D16A - 0.50 mm - 4B1956-0.50
ACL 4B1956-0.50 connecting rod bushes correspond to the manufacturer’s part number specified for Honda and Acura (D15B, D15Z, and D16A). Their function is to help guide rotating surfaces and maintain the oil film in the lower engine.
This part number is part of the ACL bearing lineup, but its current designation does not allow for the specific construction of the ACL Race Series versions to be determined without verification. It must be selected based on the dimensions of the crankshaft and the corresponding bearings.
The 0.50 mm dimension must be compared to the actual machining tolerance of the crankshaft and the clearance value measured during assembly.
Technical Specifications
- Type: Connecting rod bushes
- Manufacturer: ACL
- Manufacturer Part Number: 4B1956-0.50
- Dimension: 0.50 mm
- Main engines: D15B, D15Z, and D16A
- Manufacturers: Honda | Acura
Engine models compatible with ACL 4B1956-0.50 bearings
The engine models listed for this set include: D15B | D15Z | D16A | D16B | D16W | D16Y | D16Z.
Mounting Recommendations
Mounting recommendation: Check the surface condition of the crankshaft, measure the diameters of the crankpins, and measure the oil clearance with the bearing halves installed. Follow the engine tightening procedure. A replacement size should only be installed if the corresponding machining has been performed.