ACL Race Series Connecting Rod Bushes - Honda and Acura K20A2, K20Z1, and K24A - STD - 4B1972HX-STD
The ACL Race Series 4B1972HX-STD trimetal connecting rod bushes are designed for Honda and Acura K20A2, K20Z1, and K24A engines. They guide the connecting rod top ends over the crankpins and operate with the oil film that separates the moving surfaces. Part number 4B1972HX-STD corresponds to the standard (STD) size.
The trimetal design combines a high-resistance steel backing, a copper-lead-tin anti-friction layer, a nickel barrier, and a lead-tin-copper surface coating. This structure helps withstand the stresses of the lower engine while maintaining the conditions necessary for oil film formation.
The suffix HX identifies a version designed to adjust the oil clearance. For the HX version, ACL specifies approximately 0.025 mm of additional clearance compared to an H version of the same size, on a crankshaft of corresponding sizes. The mounting must be checked after the connecting rod caps are tightened.
Technical Specifications
- Type: connecting rod bush
- Manufacturer: ACL
- Range: ACL Race Series
- Design: trimetal, steel backing, and copper-lead-tin anti-friction plies
- ACL Material: F781 (Race Series connecting rod bushes)
- Manufacturer Part Number: 4B1972HX-STD
- Dimension: standard dimension (STD)
- Version: HX, increased oil clearance compared to the corresponding H version
- Main engines: K20A2, K20Z1, and K24A
- Manufacturers: Honda | Acura
- Rod journal diameter (nominal dimension): 47.98 to 48 mm
- Connecting rod top end bore: 51.004 to 51.024 mm
- Maximum thickness at the top: 1.487 mm
- Maximum width: 15.4 mm
Engine models compatible with ACL 4B1972HX-STD bearings
The engine models listed for this set include: K20C | K24 | K20A2 | K20Z1 | K24A | K24Z1 | K20C1.
Mounting Recommendations
Mounting recommendation: Measure the crankshaft journals with a micrometer, inspect the connecting rod bearings, and check the operating clearance after tightening the connecting rod caps in accordance with the engine manufacturer’s specifications.
ACL Race Series develops engine bearings for competition and tuning, featuring precision manufacturing, shell thickness control, and a trimetal design focused on mechanical strength and precise control of operating clearances.
-
Thickness in mm1,49
-
Width in mm15,40
-
Engine codeK20C - 2.0L 16V
K24 - 2.4L 16V -
Make (Engine)Acura
Honda -
Rod Journal Diameter in mm47,98
48,00 -
Max. connecting rod bore in mm51,02
-
Min. connecting rod bore in mm51,00