ACL Race Series Connecting Rod Bushes - Hyundai and Kia G4KF and 0T - 0.025 mm - 4B1293H-.025
ACL Race Series 4B1293H-.025 trimetal connecting rod bushes are designed for Hyundai and Kia G4KF and 0T engines. Installed in the connecting rod top ends, they serve as the interface between the connecting rod and the crankpin. Their selection determines the operating clearance and oiling of the lower engine. Part number 4B1293H-.025 corresponds to a thickness of 0.025 mm.
ACL Race Series trimetal technology consists of a steel base and a copper-lead-tin layer protected by a nickel barrier. The assembly is completed by a surface layer designed to enhance bearing performance under load and resistance to seizure.
This 0.025 mm version allows you to select bearings that match the actual condition of the crankshaft journals. The selection should be based on crankshaft measurements and not solely on the engine’s preparation level.
Technical Specifications
- Type: connecting rod bushes
- Manufacturer: ACL
- Range: ACL Race Series
- Design: trimetal, steel backing, and copper-lead-tin anti-friction plies
- ACL Material: F781 (Race Series connecting rod bushes)
- Manufacturer part number: 4B1293H-.025
- Thickness: 0.025 mm
- Version: H
- Main engines: G4KF and 0T
- Manufacturers: Hyundai | Kia
Engine models compatible with ACL 4B1293H-.025 bearings
The engine models listed for this set include: G4KF | G4KH | G4KL | G4KA | G4KC | G4KD | G4KE | G4KG | G4KJ | 0T.
Mounting Recommendations
Mounting recommendation: Check the surface condition of the crankshaft, measure the diameters of the crankpins, and measure the oil clearance with the half-bearings installed. Follow the engine tightening procedure. A repair size should only be installed if the corresponding machining has been performed.
ACL Race Series develops engine bearings for competition and performance applications, featuring precision manufacturing, shell thickness control, and a trimetal design focused on mechanical resistance and precise control of operating clearances.
-
Thickness in mm1,53
-
Width in mm17,00
-
Engine codeG4KF - 2.0L 16V
-
Make (Engine)Hyundai
Kia -
Rod Journal Diameter in mm47,93
47,95 -
Max. connecting rod bore in mm51,02
-
Min. connecting rod bore in mm51,00