ACL Race Series Connecting Rod Bushes - Saab B202 and B234 - 0.25 mm - 4B2010H-.25
The ACL Race Series 4B2010H-.25 trimetal connecting rod bushes are designed for Saab B202 and B234 engines. They guide the connecting rod top ends over the crankpins and operate using an oil film that separates the moving surfaces. Part number 4B2010H-.25 corresponds to a thickness of 0.25 mm.
The trimetal design combines a high-strength steel backing, a copper-lead-tin anti-friction layer, a nickel barrier, and a lead-tin-copper surface trim. This structure helps withstand the stresses of the lower engine while maintaining the conditions necessary for oil film formation.
This 0.25 mm version allows you to select bearings that match the actual condition of the crankshaft journals. The selection should be based on crankshaft measurements and not solely on the engine’s preparation level.
Technical Specifications
- Type: connecting rod bushes
- Manufacturer: ACL
- Range: ACL Race Series
- Design: trimetal, steel backing, and copper-lead-tin anti-friction plies
- ACL Material: F781 (Race Series connecting rod bushes)
- Manufacturer part number: 4B2010H-.25
- Thickness: 0.25 mm
- Version: H
- Main engines: B202 and B234
- Manufacturers: Saab
Engine models compatible with ACL 4B2010H-.25 bearings
The engine models listed for this set include: B202 | B204 | B205 | B206 | B234 | B235.
Mounting Recommendations
Mounting recommendation: Measure the crankshaft journals with a micrometer, inspect the connecting rod bearings, and check the operating clearance after tightening the connecting rod caps in accordance with the engine manufacturer’s specifications. A repair size should only be installed if the corresponding machining has been performed.
ACL Race Series develops engine bearings for competition and tuning applications, featuring precision manufacturing, shell thickness control, and a trimetal design focused on mechanical resistance and precise control of operating clearances.
-
Thickness in mm2,11
-
Width in mm20,25
-
Engine codeB204 - 2.0L 16V
B234 - 2.3L 16V
B234I - 2.3L 16V
B235 - 2.3L 16V -
Make (Engine)Saab
-
Rod Journal Diameter in mm51,73
51,75 -
Max. connecting rod bore in mm56,02
-
Min. connecting rod bore in mm56,00