ACL Race Series Connecting Rod Bushes - BMW N52 and N53 - STD - 6B1395HX-STD
The ACL Race Series 6B1395HX-STD trimetal connecting rod bushes are designed for BMW N52 and N53 engines. These half-bearings help guide the connecting rod top end and form the oil film essential for bearing operation. Part number 6B1395HX-STD corresponds to the standard size (STD).
The trimetal construction of the ACL Race Series bearings features a high-resistance steel base, a copper-lead-tin functional layer, and a surface finish based on a lead-tin-copper alloy, with a nickel barrier layer in between. This design ensures mechanical strength and bearing performance under severe conditions.
The HX suffix identifies a version designed to adjust the oil clearance. For the HX version, ACL specifies approximately 0.025 mm of additional clearance compared to an H version of the same size, on a crankshaft of corresponding sizes. The mounting must be checked after the connecting rod caps are tightened.
Technical Specifications
- Type: connecting rod bushes
- Manufacturer: ACL
- Range: ACL Race Series
- Design: trimetal, steel backing, and copper-lead-tin anti-friction plies
- ACL Material: F781 (Race Series connecting rod bushes)
- Manufacturer part number: 6B1395HX-STD
- Dimension: standard dimension (STD)
- Version: HX, increased oil clearance compared to the corresponding H version
- Main engines: N52 and N53
- Manufacturers: BMW
- Rod journal diameter (nominal dimension): 49.973 to 49.993 mm
- Connecting rod top end bore: 53.6 to 53.616 mm
- Maximum thickness at the top: 1.78 mm
- Maximum width: 17.55 mm
Engine models compatible with ACL 6B1395HX-STD bearings
The engine models listed for this set include: N52 | N53.
Mounting Recommendations
Mounting recommendation: Select the size based on crankshaft measurements; then check the assembled bore with the cap tightened to the specified torque. Cankshaft bearing oiling depends on the resulting clearance.
ACL Race Series develops engine bearings for competition and tuning, featuring precision manufacturing, shell thickness control, and a trimetal design focused on mechanical resistance and precise control of operating clearances.
-
Thickness in mm1,78
-
Width in mm17,55
-
Make (Engine)BMW
-
Rod Journal Diameter in mm49,97
49,99 -
Max. connecting rod bore in mm53,62
-
Min. connecting rod bore in mm53,60