ACL Race Series Connecting Rod Bushes - Subaru EJ15 and EJ16 - 0.50 mm - 4B8320H-.50
The ACL Race Series 4B8320H-.50 trimetal connecting rod bushes are designed for Subaru EJ15 and EJ16 engines. These half-bearings help guide the connecting rod top end and form the oil film essential for bearing operation. Part number 4B8320H-.50 corresponds to a thickness of 0.50 mm.
The trimetal structure of the ACL Race Series bearings features a high-resistance steel base, a copper-lead-tin functional layer, and a surface finish based on a lead-tin-copper alloy, with a nickel barrier layer in between. This design ensures mechanical strength and bearing performance under severe conditions.
This 0.50 mm size option allows you to select bearings that match the actual condition of the crankshaft journals. The selection should be based on crankshaft measurements and not solely on the engine’s preparation level.
Technical Specifications
- Type: connecting rod bushes
- Manufacturer: ACL
- Range: ACL Race Series
- Design: trimetal, steel backing, and copper-lead-tin anti-friction plies
- ACL Material: F781 (Race Series connecting rod bushes)
- Manufacturer part number: 4B8320H-.50
- Thickness: 0.50 mm
- Version: H
- Main engines: EJ15 and EJ16
- Manufacturers: Subaru
Engine models compatible with ACL 4B8320H-.50 bearings
The engine models listed for this set include: EJ15 | EJ16 | EJ18 | EJ20 | EJ22 | EJ25 | EJ20T | EJ20TT | EJ22T | EJ25T.
Mounting Recommendations
Mounting recommendation: Select the size based on crankshaft measurements; then check the assembled bore with the bearing cap tightened to the specified torque. Oiling of the bearing depends on the resulting clearance. A repair size should only be installed if the corresponding machining has been performed.
ACL Race Series develops engine bearings for competition and performance applications, featuring precision manufacturing, shell thickness control, and a trimetal design focused on mechanical resistance and precise control of operating clearances.
-
Thickness in mm1,75
-
Width in mm15,63
-
Engine codeEJ20 - 2.0L 16V
EJ22 - 2.2L 16V
EJ25 DOHC - 2.5L 16V
EJ25 SOHC - 2.5L 16V
EJ205/207 - 2.0L 16V
EJ255 - 2.5L 16V
EJ257 - 2.5L 16V -
Make (Engine)Subaru
-
Rod Journal Diameter in mm47,48
47,50 -
Max. connecting rod bore in mm51,02
-
Min. connecting rod bore in mm51,00