ACL Race Series Connecting Rod Bushes - Ford and Lotus Twin Cam - STD - 4B603HX-STD

ACL
Reference: ACL-4B603HX-STD
Supplier Ref.: 4B603HX-STD

Price: €97.00 Tax included
Available to order Within 20 days on average.
Unavailable in store (Montpellier)
Earn 97 loyalty points
Carbon footprint: 2.34 kg CO₂

ACL Race Series 4B603HX-STD connecting rod bushes with a trimetal construction are designed for Ford and Lotus Twin Cam engines. Installed in the connecting rod top ends, they serve as the interface between the connecting rod and the crankshaft. Their selection determines the operating clearance and oiling of the lower engine. Part number 4B603HX-STD corresponds to the standard (STD) size.

ACL Race Series trimetal technology consists of a steel core and a copper-lead-tin layer protected by a nickel barrier. The assembly is completed by a surface layer designed to enhance bearing performance under load and resistance to seizure.

The HX suffix identifies a version designed to adjust the oil clearance. For the HX version, ACL specifies approximately 0.025 mm of additional clearance compared to an H version of the same size, on a crankshaft of corresponding sizes. The mounting must be checked after tightening the connecting rod caps.


Technical Specifications

  • Type: connecting rod bushes
  • Manufacturer: ACL
  • Range: ACL Race Series
  • Design: trimetal, steel backing, and copper-lead-tin anti-friction plies
  • ACL Material: F781 (Race Series connecting rod bushes)
  • Manufacturer part number: 4B603HX-STD
  • Specification: standard specification (STD)
  • Version: HX, increased oil clearance compared to the corresponding H version
  • Main engines: Twin Cam
  • Manufacturers: Ford | Lotus
  • Rod journal diameter (nominal dimension): 49.2 to 49.212 mm
  • Connecting rod top end bore: 52.896 to 52.908 mm
  • Maximum thickness at the top: 1.817 mm
  • Maximum width: 22.35 mm

Engine configurations compatible with ACL 4B603HX-STD bearings

The engine configurations listed for this set include: Twin Cam.

Mounting Recommendations

Mounting recommendation: Check the surface condition of the crankshaft, measure the diameters of the crankpins, and measure the oil clearance with the half-bearings installed. Follow the engine tightening procedure.

ACL Race Series develops engine bearings for competition and performance applications, featuring precision manufacturing, shell thickness control, and a trimetal design focused on mechanical strength and precise control of operating clearances.

  • Thickness in mm
    1,82
  • Width in mm
    22,35
  • Engine code
    Twin Cam - 1.6L 8V
  • Make (Engine)
    Ford
    Lotus
  • Rod Journal Diameter in mm
    49,20
    49,21
  • Max. connecting rod bore in mm
    52,91
  • Min. connecting rod bore in mm
    52,90

16 other products in the same category: