ACL Race Series Connecting Rod Bushes - Porsche 911 - 0.25 mm - 6B2452H-.25
ACL Race Series 6B2452H-.25 trimetal connecting rod bushes are designed for Porsche 911 engines. In the lower engine, they allow the connecting rods to rotate around the crankpins while supporting the loads transmitted by the pistons. The part number 6B2452H-.25 corresponds to a thickness of 0.25 mm.
Developed to withstand the stresses of engine tuning, ACL Race Series trimetal connecting rod bearings combine a steel backing, a copper-lead-tin alloy, a nickel barrier, and an anti-friction layer. Their radial runout helps maintain the oil film when the bearing seats undergo deformation during operation.
This 0.25 mm variant allows you to select bearings that match the actual condition of the crankpins. The selection should be based on crankshaft measurements and not solely on the engine’s tuning level.
Technical Specifications
- Type: connecting rod bush
- Manufacturer: ACL
- Range: ACL Race Series
- Design: trimetal, steel backing, and copper-lead-tin anti-friction plies
- ACL Material: F781 (Race Series connecting rod bushes)
- Manufacturer part number: 6B2452H-.25
- Thickness: 0.25 mm
- Version: H
- Main engines: 911
- Manufacturers: Porsche
Engine configurations compatible with ACL 6B2452H-.25 bearings
The engine models listed for this set include: 901 | 911.
Mounting Recommendations
Mounting recommendation: Before assembly, check the geometry of the connecting rod top ends, the actual dimension of the crankshaft journals, and the final oil clearance. Apply the torque values and follow the tightening sequence specified for the engine. A repair size should only be installed if the corresponding machining has been performed.
ACL Race Series develops engine bearings for competition and tuning applications, featuring precision manufacturing, shell thickness control, and a trimetal design focused on mechanical resistance and control of operating clearances.
-
Thickness in mm2,12
-
Width in mm17,80
-
Engine code901 - 2.0L 12V
911 - 2.2L 12V
911 - 2.4L 12V -
Make (Engine)Porsche
-
Rod Journal Diameter in mm56,72
56,74 -
Max. connecting rod bore in mm61,02
-
Min. connecting rod bore in mm61,00