ACL Race Series Connecting Rod Bushes - Suzuki - 0.25 mm - 4B8431H-.25
ACL Race Series 4B8431H-.25 connecting rod bushes with a trimetal construction are designed for Suzuki engines compatible with this bearing series. Installed in the connecting rod top ends, they serve as the interface between the connecting rod and the crankpin. Their selection determines the operating clearance and oiling of the lower engine assembly. Part number 4B8431H-.25 corresponds to a dimension of 0.25 mm.
ACL Race Series trimetal technology consists of a steel core and a copper-lead-tin layer protected by a nickel barrier. The assembly is completed by a surface layer designed to enhance bearing performance under load and resistance to seizure.
This 0.25 mm version allows you to select bearings that match the actual condition of the crankpins. The selection should be based on crankshaft measurements and not solely on the engine’s preparation level.
Technical Specifications
- Type: connecting rod bush
- Manufacturer: ACL
- Range: ACL Race Series
- Design: trimetal, steel backing, and copper-lead-tin anti-friction plies
- ACL Material: F781 (Race Series connecting rod bushes)
- Manufacturer part number: 4B8431H-.25
- Thickness: 0.25 mm
- Version: H
- Manufacturers: Suzuki
Engine Application
Verify that the engine type and crankshaft configuration match the specified part number before mounting.
Mounting Recommendations
Mounting recommendation: Inspect the surface condition of the crankshaft, measure the diameters of the crankpins, and measure the oil clearance with the half-bearings installed. Follow the engine tightening procedure. A replacement size should only be installed if the corresponding machining has been performed.
ACL Race Series develops engine bearings for competition and tuning applications, featuring precision manufacturing, shell thickness control, and a trimetal design focused on mechanical resistance and precise control of operating clearances.
-
Thickness in mm1,62
-
Width in mm17,00
-
Make (Engine)Suzuki
-
Rod Journal Diameter in mm37,73
37,75 -
Max. connecting rod bore in mm41,02
-
Min. connecting rod bore in mm41,00