ACL Race Series Connecting Rod Bushes - Toyota 2GR-FE and 2GR - 0.025 mm - 6B8466H-.025
ACL Race Series 6B8466H-.025 trimetal connecting rod bushes are designed for Toyota 2GR-FE and 2GR engines. These half-bearings help guide the connecting rod top end and form the oil film essential for bearing operation. Part number 6B8466H-.025 corresponds to a thickness of 0.025 mm.
The trimetal structure of the ACL Race Series bearings features a steel base with high resistance, a copper-lead-tin functional layer, and a surface finish based on a lead-tin-copper alloy, with a nickel barrier layer in between. It is designed to ensure the mechanical integrity and proper operation of the bearing under severe conditions.
This 0.025 mm size option allows you to select bearings that match the actual condition of the crankshaft journals. The selection should be based on measurements of the crankshaft and not solely on the engine’s preparation level.
Technical Specifications
- Type: connecting rod bushes
- Manufacturer: ACL
- Range: ACL Race Series
- Design: trimetal, steel backing, and copper-lead-tin anti-friction plies
- ACL Material: F781 (Race Series connecting rod bushes)
- Manufacturer part number: 6B8466H-.025
- Thickness: 0.025 mm
- Version: H
- Main engines: 2GR-FE and 2GR
- Manufacturers: Toyota
Engine models compatible with ACL 6B8466H-.025 bearings
The engine models listed for this set include: 2GR-FE | 2GR.
Mounting Recommendations
Mounting recommendation: Select the size based on crankshaft measurements; then check the assembled bore with the bearing cap tightened to the specified torque. Bearing oiling depends on the resulting clearance. A repair size should only be installed if the corresponding machining has been performed.
ACL Race Series develops engine bearings for competition and performance applications, featuring precision manufacturing, shell thickness control, and a trimetal design focused on mechanical strength and precise control of operating clearances.
-
Thickness in mm1,50
-
Width in mm15,00
-
Make (Engine)Toyota
-
Rod Journal Diameter in mm52,96
52,98 -
Max. connecting rod bore in mm56,02
-
Min. connecting rod bore in mm56,00