ACL Race Series Connecting Rod Bushes - MINI W11B16 - STD - 4B2902H-STD
ACL Race Series 4B2902H-STD connecting rod bushes with a trimetal structure are designed for MINI W11B16 engines. These half-bearings help guide the connecting rod top end and form the oil film essential for bearing operation. The part number 4B2902H-STD corresponds to the standard size (STD).
The trimetal construction of the ACL Race Series bearings features a high-resistance steel base, a copper-lead-tin functional ply, and a surface finish based on a lead-tin-copper alloy, with an interposed nickel barrier. This design ensures mechanical strength and bearing performance under severe conditions.
The H version in STD size is intended for mounting while maintaining the nominal size of the crankshaft journals. To determine the actual oil clearance, the bearings must be measured once installed and the caps tightened to the specified torque.
Technical Specifications
- Type: Connecting rod bush
- Manufacturer: ACL
- Range: ACL Race Series
- Design: trimetal, steel backing, and copper-lead-tin anti-friction plies
- ACL Material: F781 (Race Series connecting rod bushes)
- Manufacturer Part Number: 4B2902H-STD
- Dimension: standard dimension (STD)
- Version: H
- Main engines: W11B16
- Manufacturers: MINI
- Rod journal diameter (nominal dimension): 45.992 to 46.008 mm
- Connecting rod top end bore: 49 to 49.02 mm
- Maximum thickness at the top: 1.489 mm
- Maximum width: 17.25 mm
Engine models compatible with ACL 4B2902H-STD bearings
The engine models listed for this set include: W11B16.
Mounting Recommendations
Mounting recommendation: Select the size based on crankshaft measurements; then check the assembled bore with the bearing cap tightened to the specified torque. Oiling of the bearing depends on the resulting clearance.
ACL Race Series develops engine bearings for competition and tuning, featuring precision manufacturing, shell thickness control, and a trimetal design focused on mechanical strength and precise control of operating clearances.
-
Thickness in mm1,49
-
Width in mm17,25
-
Engine codeW11B16 - 1.6L 16V
-
Make (Engine)Mini
-
Rod Journal Diameter in mm45,99
46,01 -
Max. connecting rod bore in mm49,02
-
Min. connecting rod bore in mm49,00