ACL Race Series Connecting Rod Bushes - Honda and Acura B18C1, B18C5, and B18C2 - STD - 4B1925HX-STD
ACL Race Series 4B1925HX-STD connecting rod bushes with a trimetal construction are designed for Honda and Acura B18C1, B18C5, and B18C2 engines. In the lower engine, they allow the connecting rods to rotate around the crankpins while supporting the loads transmitted by the pistons. Part number 4B1925HX-STD corresponds to the standard size (STD).
Developed to withstand the stresses of engine tuning, ACL Race Series trimetal bearings combine a steel backing, a copper-lead-tin alloy, a nickel barrier, and an anti-friction layer. Their radial runout helps maintain the oil film when the bearing seats deform during operation.
The HX suffix identifies a version designed to adjust the oil clearance. For the HX version, ACL specifies approximately 0.025 mm of additional clearance compared to an H version of the same size, on a crankshaft of corresponding sizes. The mounting must be checked after tightening of the connecting rod caps.
Technical Specifications
- Type: Connecting rod bush
- Manufacturer: ACL
- Range: ACL Race Series
- Design: trimetal, steel backing, and copper-lead-tin anti-friction plies
- ACL Material: F781 (Race Series connecting rod bushes)
- Manufacturer Part Number: 4B1925HX-STD
- Dimension: standard dimension (STD)
- Version: HX, increased oil clearance compared to the corresponding H version
- Main engines: B18C1, B18C5, and B18C2
- Manufacturers: Honda | Acura
- Rod journal diameter (nominal dimension): 44.976 to 45 mm
- Connecting rod top end bore: 48 to 48.024 mm
- Maximum thickness at the top: 1.489 mm
- Maximum width: 17.5 mm
Engine models compatible with ACL 4B1925HX-STD bearings
The engine models listed for this set include: B18C1 | B18C5 | B18C2 | B18C7.
Mounting Recommendations
Mounting recommendation: Before assembly, check the geometry of the connecting rod top ends, the actual dimension of the crankshaft journals, and the final oil clearance. Apply the torque values and follow the tightening sequence specified for the engine.
ACL Race Series develops engine bearings for competition and tuning applications, featuring precision manufacturing, shell thickness control, and a trimetal design focused on mechanical resistance and control of operating clearances.
-
Thickness in mm1,49
-
Width in mm17,50
-
Engine codeB18C1 - 1.8L 16V
B18C5 - 1.8L 16V -
Make (Engine)Acura
Honda -
Rod Journal Diameter in mm44,98
45,00 -
Max. connecting rod bore in mm48,02
-
Min. connecting rod bore in mm48,00