ACL Race Series Connecting Rod Bushes - Ford ECOBOOST - STD - 3B7328H-STD
ACL Race Series 3B7328H-STD connecting rod bushes with a trimetal structure are designed for Ford ECOBOOST engines. These half-bearings help guide the connecting rod top end and form the oil film essential for bearing operation. The part number 3B7328H-STD corresponds to the standard size (STD).
The trimetal construction of the ACL Race Series bearings features a high-resistance steel base, a copper-lead-tin functional layer, and a surface finish based on a lead-tin-copper alloy, with a nickel barrier layer in between. This design ensures mechanical strength and bearing performance under severe conditions.
The H version in STD size is intended for mounting while maintaining the nominal size of the crankshaft journals. To determine the effective oil clearance, the bearings must be measured once installed and the caps tightened to the specified torque.
Technical Specifications
- Type: Connecting rod bush
- Manufacturer: ACL
- Range: ACL Race Series
- Design: trimetal, steel backing, and copper-lead-tin anti-friction plies
- ACL Material: F781 (Race Series connecting rod bushes)
- Manufacturer part number: 3B7328H-STD
- Dimension: standard dimension (STD)
- Version: H
- Main engines: ECOBOOST
- Manufacturers: Ford
Engine types compatible with ACL 3B7328H-STD bearings
The engine types listed for this set include: Ecoboost 3 | ECOBOOST.
Mounting Recommendations
Mounting recommendation: Select the size based on crankshaft measurements; then check the assembled bore with the bearing cap tightened to the specified torque. Oiling of the crankshaft bearing depends on the resulting clearance.
ACL Race Series develops engine bearings for competition and performance applications, featuring precision manufacturing, shell thickness control, and a trimetal design focused on mechanical resistance and precise control of operating clearances.
-
Thickness in mm1,50
-
Width in mm15,60
-
Engine codeEcoboost 3 - 1.0L 12V
-
Make (Engine)Ford
-
Rod Journal Diameter in mm0,00
40,00 -
Max. connecting rod bore in mm43,00
-
Min. connecting rod bore in mm0,00