ACL Race Series Connecting Rod Bushes - Honda and Acura A18A, ES, and A20A - STD - 4B1946HX-STD
The ACL Race Series 4B1946HX-STD trimetal connecting rod bushes are designed for Honda and Acura A18A, ES, and A20A engines. These half-bearings help guide the connecting rod top end and form the oil film essential for bearing operation. Part number 4B1946HX-STD corresponds to the standard size (STD).
The trimetal structure of the ACL Race Series bearings features a high-resistance steel base, a copper-lead-tin functional ply, and a surface finish based on a lead-tin-copper alloy, with a nickel barrier layer in between. This design is intended to ensure the mechanical strength and proper operation of the bearing under severe conditions.
The HX suffix identifies a version designed to adjust the oil clearance. For the HX version, ACL specifies approximately 0.025 mm of additional clearance compared to an H version of the same size, on a crankshaft of corresponding sizes. The mounting must be checked after tightening the connecting rod caps.
Technical Specifications
- Type: connecting rod bushes
- Manufacturer: ACL
- Range: ACL Race Series
- Design: trimetal, steel backing, and copper-lead-tin anti-friction plies
- ACL Material: F781 (Race Series connecting rod bushes)
- Manufacturer part number: 4B1946HX-STD
- Dimension: standard dimension (STD)
- Version: HX, increased oil clearance compared to the corresponding H version
- Main engines: A18A, ES, and A20A
- Manufacturers: Honda | Acura
- Rod journal diameter (nominal dimension): 44.98 to 45 mm
- Connecting rod top end bore: 48 to 48.024 mm
- Maximum thickness at the top: 1.491 mm
- Maximum width: 19.5 mm
Engine models compatible with ACL 4B1946HX-STD bearings
The engine models listed for this set include: B16A | B17A | B18A1 | B18B1 | B20B | A18A | ES | A20A | B17A1 | B18B2 | B18A | B20A | F18B | F20B | A20A1 | A20A2 | A20A3 | A20A4 | B16A1 | B16A2 | B16A3 | B16A4 | B16A6.
Mounting Recommendations
Mounting recommendation: Select the size based on crankshaft measurements; then check the assembled bore with the cap tightened to the specified torque. Cankshaft bearing oiling depends on the resulting clearance.
ACL Race Series develops engine bearings for competition and tuning, featuring precision manufacturing, shell thickness control, and a trimetal design focused on mechanical resistance and precise control of operating clearances.
-
Thickness in mm1,49
-
Width in mm19,50
-
Engine codeB16A - 1.6L 16V
B17A - 1.7L 16V
B18A1/B1 - 1.8L 16V
B20B - 2.0L 16V -
Make (Engine)Acura
Honda -
Rod Journal Diameter in mm44,98
45,00 -
Max. connecting rod bore in mm48,02
-
Min. connecting rod bore in mm48,00