ACL Race Series Connecting Rod Bushes - MINI 4-Cyl - 0.010 inches (0.254 mm) - 4B2201H-010
The ACL Race Series 4B2201H-010 trimetal connecting rod bushes are designed for MINI 4-cylinder engines. In the lower engine, they allow the connecting rods to rotate around the crankpins while supporting the loads transmitted by the pistons. Part number 4B2201H-010 corresponds to a dimension of 0.010 inches (0.254 mm).
Developed to withstand the stresses of engine tuning, ACL Race Series trimetal bearings combine a steel backing, a copper-lead-tin alloy, a nickel barrier, and an anti-friction layer. Their radial runout helps maintain the oil film when the bearing seats undergo deformation during operation.
This 0.010-inch (0.254 mm) size option allows you to select bearings that match the actual condition of the crankshaft journals. The selection should be based on crankshaft measurements and not solely on the engine’s tuning level.
Technical Specifications
- Type: Connecting rod bush
- Manufacturer: ACL
- Range: ACL Race Series
- Design: trimetal, steel backing, and copper-lead-tin anti-friction plies
- ACL Material: F781 (Race Series connecting rod bushes)
- Manufacturer Part Number: 4B2201H-010
- Thickness: 0.010 inches (0.254 mm)
- Version: H
- Main engines: 4CYL
- Manufacturers: MINI
Engine configurations compatible with ACL 4B2201H-010 bearings
The engine types listed for this set include: 4CYL.
Mounting Recommendations
Mounting recommendation: Before assembly, check the geometry of the connecting rod top ends, the actual dimension of the crankshaft journals, and the final oil clearance. Apply the torque values and follow the tightening sequence specified for the engine. A repair size should only be installed if the corresponding machining has been performed.
ACL Race Series develops engine bearings for competition and performance applications, featuring precision manufacturing, shell thickness control, and a trimetal design optimized for mechanical strength and precise control of operating clearances.
-
Thickness in mm1,95
-
Width in mm22,35
-
Make (Engine)Mini
-
Rod Journal Diameter in mm41,03
41,04 -
Max. connecting rod bore in mm44,98
-
Min. connecting rod bore in mm44,97