ACL Race Series Connecting Rod Bushes - Honda and Acura B16A2 - STD - 4B1946H-STD
ACL Race Series 4B1946H-STD connecting rod bushes with a trimetal structure are designed for Honda and Acura B16A2 engines. These half-bearings help guide the connecting rod top end and form the oil film essential for bearing operation. The part number 4B1946H-STD corresponds to the standard size (STD).
The trimetal construction of the ACL Race Series bearings features a high-resistance steel base, a copper-lead-tin functional ply, and a surface finish based on a lead-tin-copper alloy, with a nickel barrier layer in between. This design is intended to ensure mechanical durability and bearing performance under severe conditions.
The H version in STD size is intended for mounting while maintaining the nominal size of the crankshaft journals. To determine the actual oil clearance, the bearings must be measured once installed and the caps tightened to the specified torque.
Technical Specifications
- Type: Connecting rod bush
- Manufacturer: ACL
- Range: ACL Race Series
- Design: trimetal, steel backing, and copper-lead-tin anti-friction plies
- ACL Material: F781 (Race Series connecting rod bushes)
- Manufacturer Part Number: 4B1946H-STD
- Dimension: standard dimension (STD)
- Version: H
- Main engines: B16A2
- Manufacturers: Honda | Acura
- Rod journal diameter (nominal dimension): 44.98 to 45 mm
- Connecting rod top end bore: 48 to 48.024 mm
- Maximum thickness at the top: 1.504 mm
- Maximum width: 19.5 mm
Engine models compatible with ACL 4B1946H-STD bearings
The engine models listed for this set include: A18A | ES | A20A | B16A | B17A1 | B18A1 | B18B1 | B18B2 | B18A | B20A | F18B | F20B | B16A2 | A20A1 | A20A2 | A20A3 | A20A4 | B16A1 | B16A3 | B16A4 | B16A6.
Mounting Recommendations
Mounting recommendation: Select the size based on crankshaft measurements; then check the assembled bore with the cap tightened to the specified torque. Bearing oiling depends on the resulting clearance.
ACL Race Series develops engine bearings for competition and tuning, featuring precision manufacturing, shell thickness control, and a trimetal design focused on mechanical strength and control of operating clearances.
-
Thickness in mm1,50
-
Width in mm19,50
-
Make (Engine)Acura
Honda -
Rod Journal Diameter in mm44,98
45,00 -
Max. connecting rod bore in mm48,02
-
Min. connecting rod bore in mm48,00