ACL Race Series Connecting Rod Bushes - Suzuki - STD - 4B8431HX-STD

ACL
Reference: ACL-4B8431HX-STD
Supplier Ref.: 4B8431HX-STD

Price: €135.00 Tax included
Supplier stock Shipped between 2026-11-26 and 2026-11-30 from our warehouse
Unavailable in store (Montpellier)
Earn 135 loyalty points
Carbon footprint: 3 kg CO₂

The ACL Race Series 4B8431HX-STD connecting rod bushes, featuring a trimetal construction, are designed for Suzuki engines compatible with this family of bearings. These half-bearings help guide the connecting rod top end and form the oil film essential for the bearing’s operation. Part number 4B8431HX-STD corresponds to the standard size (STD).

The trimetal construction of the ACL Race Series bearings features a high-resistance steel base, a copper-lead-tin functional layer, and a surface finish based on a lead-tin-copper alloy, with an interposed nickel barrier. This design is intended to ensure the mechanical strength and proper operation of the bearing under severe conditions.

The HX suffix identifies a version designed to adjust the oil clearance. For the HX version, ACL specifies approximately 0.025 mm of additional clearance compared to an H version of the same size, on a crankshaft of corresponding sizes. The mounting must be checked after the connecting rod caps are tightened.


Technical Specifications

  • Type: connecting rod bush
  • Manufacturer: ACL
  • Range: ACL Race Series
  • Design: trimetal, steel backing, and copper-lead-tin anti-friction plies
  • ACL Material: F781 (Race Series connecting rod bushes)
  • Manufacturer part number: 4B8431HX-STD
  • Dimension: standard dimension (STD)
  • Version: HX, increased oil clearance compared to the corresponding H version
  • Manufacturers: Suzuki
  • Rod journal diameter (nominal dimension): 37.976 to 38 mm
  • Connecting rod top end bore: 41 to 41.016 mm
  • Maximum thickness at the top: 1.48 mm
  • Maximum width: 17 mm

Engine Application

Verify that the engine type and crankshaft configuration match the specified part number before mounting.

Mounting Recommendations

Mounting recommendation: Select the size based on the crankshaft measurements; then check the assembled bore with the cap tightened to the specified torque. Cankshaft bearing oiling depends on the resulting clearance.

ACL Race Series develops engine bearings for competition and tuning applications, featuring precision manufacturing, shell thickness control, and a trimetal design focused on mechanical strength and precise control of operating clearances.

  • Thickness in mm
    1,48
  • Width in mm
    17,00
  • Make (Engine)
    Suzuki
  • Rod Journal Diameter in mm
    37,98
    38,00
  • Max. connecting rod bore in mm
    41,02
  • Min. connecting rod bore in mm
    41,00

16 other products in the same category:

Customers who bought this product also bought: