ACL Race Series Connecting Rod Bushes - BMW and Toyota B58B30 and S58B30 - STD - 6B1510HX-STD

ACL
Reference: ACL-6B1510HX-STD
Supplier Ref.: 6B1510HX-STD

Price: €212.00 Tax included
Available to order Within 13 days on average.
Unavailable in store (Montpellier)
Earn 212 loyalty points (that is €5.00 in vouchers)

The ACL Race Series 6B1510HX-STD connecting rod bushes, featuring a trimetal construction, are designed for BMW and Toyota B58B30 and S58B30 engines. They guide the connecting rod top ends on the crankshaft journals and operate using an oil film that separates the moving surfaces. The part number 6B1510HX-STD corresponds to the standard size (STD).

The trimetal design combines a high-strength steel backing, a copper-lead-tin anti-friction layer, a nickel barrier, and a lead-tin-copper surface coating. This structure helps withstand the stresses of the lower engine while maintaining the conditions necessary for oil film formation.

The suffix HX identifies a version designed to adjust the oil clearance. For the HX version, ACL specifies approximately 0.025 mm of additional clearance compared to an H version of the same size, on a crankshaft of corresponding sizes. The mounting must be checked after tightening the connecting rod caps.


Technical Specifications

  • Type: connecting rod bush
  • Manufacturer: ACL
  • Range: ACL Race Series
  • Design: trimetal, steel backing, and copper-lead-tin anti-friction plies
  • ACL Material: F781 (Race Series connecting rod bushes)
  • Manufacturer part number: 6B1510HX-STD
  • Dimension: standard dimension (STD)
  • Version: HX, increased oil clearance compared to the corresponding H version
  • Main engines: B58B30 and S58B30
  • Manufacturers: BMW | Toyota
  • Rod journal diameter (nominal dimension): 49.975 to 49.992 mm
  • Connecting rod top end bore: 53.6 to 53.619 mm
  • Maximum thickness at the top: 1.78 mm
  • Maximum width: 19.55 mm

Engine models compatible with ACL 6B1510HX-STD bearings

The engine models listed for this set include: B58B30 | S58B30.

Mounting Recommendations

Mounting recommendation: Measure the crankshaft journals with a micrometer, inspect the connecting rod bearings, and check the operating clearance after tightening the connecting rod caps in accordance with the engine manufacturer’s specifications.

ACL Race Series develops engine bearings for competition and tuning applications, featuring precision manufacturing, shell thickness control, and a trimetal design focused on mechanical resistance and precise control of operating clearances.

  • Thickness in mm
    1,78
  • Width in mm
    19,55
  • Make (Engine)
    BMW
    Toyota
  • Rod Journal Diameter in mm
    49,98
    49,99
  • Max. connecting rod bore in mm
    53,62
  • Min. connecting rod bore in mm
    53,60

16 other products in the same category: