ACL Race Series Connecting Rod Bushes - Porsche - 0.25 mm - 6B2473H-.25
The ACL Race Series 6B2473H-.25 connecting rod bushes, featuring a trimetal construction, are designed for Porsche engines compatible with this family of bearings. Installed in the connecting rod top ends, they serve as the interface between the connecting rod and the crankshaft. Their selection determines the operating clearance and oiling of the lower engine assembly. Part number 6B2473H-.25 corresponds to a dimension of 0.25 mm.
ACL Race Series trimetal technology consists of a steel base and a copper-lead-tin layer protected by a nickel barrier. The assembly is completed by a surface layer designed to enhance bearing performance under load and resistance to seizure.
This 0.25 mm version allows you to select bearings that match the actual condition of the crankshaft journals. The selection should be based on crankshaft measurements and not solely on the engine’s preparation level.
Technical Specifications
- Type: connecting rod bushes
- Manufacturer: ACL
- Range: ACL Race Series
- Design: trimetal, steel backing, and copper-lead-tin anti-friction plies
- ACL Material: F781 (Race Series connecting rod bushes)
- Manufacturer part number: 6B2473H-.25
- Thickness: 0.25 mm
- Version: H
- Manufacturers: Porsche
Engine Application
Verify that the engine type and crankshaft configuration match the specified part number before mounting.
Mounting Recommendations
Mounting recommendation: Inspect the surface condition of the crankshaft, measure the diameters of the crankpins, and measure the oil clearance with the half-bearings installed. Follow the engine tightening procedure. A replacement size should only be installed if the corresponding machining has been performed.
ACL Race Series develops engine bearings for competition and tuning applications, featuring precision manufacturing, shell thickness control, and a trimetal design optimized for mechanical resistance and precise control of operating clearances.
-
Thickness in mm1,62
-
Width in mm14,80
-
Make (Engine)Porsche
-
Rod Journal Diameter in mm54,72
54,74 -
Max. connecting rod bore in mm58,02
-
Min. connecting rod bore in mm58,00