ACL Race Series Connecting Rod Bushes - Alfa Romeo 6224 and 105 - STD - 4B1110H-STD
The ACL Race Series 4B1110H-STD connecting rod bushes, featuring a trimetal construction, are designed for Alfa Romeo 6224 and 105 engines. In the lower engine, they allow the connecting rods to rotate around the crankpins while supporting the loads transmitted by the pistons. The part number 4B1110H-STD corresponds to the standard size (STD).
Developed to withstand the stresses of engine tuning, ACL Race Series trimetal connecting rod bearings combine a steel backing, a copper-lead-tin alloy, a nickel barrier, and an anti-friction layer. Their radial runout helps maintain the oil film when the housings undergo deformation during operation.
The H version in STD size is intended for mounting while maintaining the nominal size of the crankshaft journals. To determine the effective oil clearance, measure the bearings once they are installed and the caps are tightened to the specified torque.
Technical Specifications
- Type: Connecting rod bushes
- Manufacturer: ACL
- Range: ACL Race Series
- Design: trimetal, steel backing, and copper-lead-tin anti-friction plies
- ACL Material: F781 (Race Series connecting rod bushes)
- Manufacturer Part Number: 4B1110H-STD
- Dimension: standard dimension (STD)
- Version: H
- Main engines: 6224 and 105
- Manufacturers: Alfa Romeo
- Rod journal diameter (nominal dimension): 49.987 to 50 mm
- Connecting rod top end bore: 53.693 to 53.708 mm
- Maximum thickness at the top: 1.836 mm
- Maximum width: 23.44 mm
Engine configurations compatible with ACL 4B1110H-STD bearings
The engine models listed for this set include: 6224 | 105.
Mounting Recommendations
Mounting recommendation: Before assembly, check the geometry of the connecting rod top ends, the actual dimension of the crankshaft journals, and the final oil clearance. Apply the torque values and follow the tightening sequence specified for the engine.
ACL Race Series develops engine bearings for competition and performance applications, featuring precision manufacturing, shell thickness control, and a trimetal design focused on mechanical strength and precise control of operating clearances.
-
Thickness in mm1,84
-
Width in mm23,44
-
Engine code105 - 2.0L 8V
6224 - 2.0L 8V -
Make (Engine)Alfa Romeo
-
Rod Journal Diameter in mm49,99
50,00 -
Max. connecting rod bore in mm53,71
-
Min. connecting rod bore in mm53,69