ACL Race Series Connecting Rod Bushes - Toyota 1GR-FE and 1GR - 0.25 mm - 6B8262H-.25
ACL Race Series 6B8262H-.25 trimetal connecting rod bushes are designed for Toyota 1GR-FE and 1GR engines. Installed in the connecting rod top ends, they serve as the interface between the connecting rod and the crankpin. Their selection determines the operating clearance and oiling of the lower engine. Part number 6B8262H-.25 corresponds to a thickness of 0.25 mm.
ACL Race Series trimetal technology consists of a steel base and a copper-lead-tin layer protected by a nickel barrier. The assembly is completed by a surface layer designed to enhance bearing performance under load and resistance to seizure.
This 0.25 mm version allows you to select bearings that match the actual condition of the crankshaft journals. The selection should be based on crankshaft measurements and not solely on the engine’s preparation level.
Technical Specifications
- Type: Connecting rod bushes
- Manufacturer: ACL
- Range: ACL Race Series
- Design: trimetal, steel backing, and copper-lead-tin anti-friction plies
- ACL Material: F781 (Race Series connecting rod bushes)
- Manufacturer part number: 6B8262H-.25
- Thickness: 0.25 mm
- Version: H
- Main engines: 1GR-FE and 1GR
- Manufacturers: Toyota
Engine models compatible with ACL 6B8262H-.25 bearings
The engine models listed for this set include: 1GR-FE | 1GR.
Mounting Recommendations
Mounting recommendation: Check the surface condition of the crankshaft, measure the diameters of the crankpins, and measure the oil clearance with the half-bearings installed. Follow the engine tightening procedure. A repair size should only be installed if the corresponding machining has been performed.
ACL Race Series develops engine bearings for competition and tuning applications, featuring precision manufacturing, shell thickness control, and a trimetal design focused on mechanical resistance and precise control of operating clearances.
-
Thickness in mm1,62
-
Width in mm16,00
-
Make (Engine)Toyota
-
Rod Journal Diameter in mm55,74
55,75 -
Max. connecting rod bore in mm59,02
-
Min. connecting rod bore in mm59,00