ACL Race Series Connecting Rod Bushes - Ford DURATEC - 0.025 mm - 4B7267H-.025
The ACL Race Series 4B7267H-.025 trimetal connecting rod bushes are designed for Ford DURATEC engines. In the lower engine, they allow the connecting rods to rotate around the crankpins while supporting the loads transmitted by the pistons. Part number 4B7267H-.025 corresponds to a thickness of 0.025 mm.
Developed to withstand the stresses of engine tuning, ACL Race Series trimetal connecting rod bearings combine a steel bracket, a copper-lead-tin alloy, a nickel barrier, and an anti-friction layer. Their radial runout helps maintain the oil film when the bearing seats experience deformation during operation.
This 0.025 mm version allows you to select bearings that match the actual condition of the crankshaft journals. The selection should be based on crankshaft measurements and not solely on the engine’s tuning level.
Technical Specifications
- Type: connecting rod bushes
- Manufacturer: ACL
- Range: ACL Race Series
- Design: trimetal, steel backing, and copper-lead-tin anti-friction plies
- ACL Material: F781 (Race Series connecting rod bushes)
- Manufacturer part number: 4B7267H-.025
- Thickness: 0.025 mm
- Version: H
- Main engines: DURATEC
- Manufacturers: Ford
Engine types compatible with ACL 4B7267H-.025 bearings
The engine types listed for this set include: EcoBoost | DURATEC.
Mounting Recommendations
Mounting recommendation: Before assembly, check the geometry of the connecting rod top ends, the actual dimension of the crankshaft journals, and the final oil clearance. Apply the torque values and follow the tightening sequence specified for the engine. A repair size should only be installed if the corresponding machining has been performed.
ACL Race Series develops engine bearings for competition and performance applications, featuring precision manufacturing, shell thickness control, and a trimetal design focused on mechanical resistance and control of operating clearances.
-
Thickness in mm1,53
-
Width in mm15,30
-
Engine codeEcoBoost - 1.6L 16V
-
Make (Engine)Ford
-
Rod Journal Diameter in mm43,96
43,98 -
Max. connecting rod bore in mm47,05
-
Min. connecting rod bore in mm47,04