ACL Race Series Connecting Rod Bushes - Audi and Volkswagen VR6 - 0.025 mm - 6B5530H-.025
ACL Race Series 6B5530H-.025 connecting rod bushes with a trimetal structure are designed for Audi and Volkswagen VR6 engines. These half-bearings help guide the connecting rod top end and form the oil film essential for bearing operation. Part number 6B5530H-.025 corresponds to a thickness of 0.025 mm.
The trimetal construction of the ACL Race Series bearings features a high-resistance steel base, a copper-lead-tin functional ply, and a surface finish based on a lead-tin-copper alloy, with a nickel barrier layer in between. This design is intended to ensure the mechanical integrity and proper operation of the bearing under severe conditions.
This 0.025 mm size option allows you to select bearings that match the actual condition of the crankshaft journals. The selection should be based on measurements of the crankshaft and not solely on the engine’s preparation level.
Technical Specifications
- Type: connecting rod bush
- Manufacturer: ACL
- Range: ACL Race Series
- Design: trimetal, steel backing, and copper-lead-tin anti-friction plies
- ACL Material: F781 (Race Series connecting rod bushes)
- Manufacturer part number: 6B5530H-.025
- Thickness: 0.025 mm
- Version: H
- Main engines: VR6
- Manufacturers: Audi | Volkswagen
Engine types compatible with ACL 6B5530H-.025 bearings
This part number applies specifically to the following engine variants within the described family: AAA | ABV | AES | AMV | AQP | AUE | AXJ | AXZ | AYL | AYT | AZZ | BAA | BDB | BDE | BDL | BFH | BHE | BHK | BKJ | BKK. The list of engine codes and applications must be cross-referenced with the exact mounting before ordering.
Mounting Recommendations
Mounting recommendation: Select the size based on crankshaft measurements; then check the assembled bore with the bearing cap tightened to the specified torque. Oiling of the bearing depends on the resulting clearance. A replacement size should only be installed if the corresponding machining has been performed.
ACL Race Series develops engine bearings for competition and performance applications, featuring precision manufacturing, shell thickness control, and a trimetal design focused on mechanical resistance and precise control of operating clearances.
-
Thickness in mm1,42
-
Width in mm17,00
-
Engine codeR32 - 3.2L 24V
R36 - 3.6L 24V
VR5 - 2.3L 10V
VR5 - 2.3L 20V
VR6 - 2.8/2.9L 12V
VR6 - 2.8L 24V -
Make (Engine)Audi
Volkswagen -
Rod Journal Diameter in mm53,93
53,95 -
Max. connecting rod bore in mm56,82
-
Min. connecting rod bore in mm56,80