ACL Race Series Connecting Rod Bushes - Volkswagen and Audi EA888 - STD - 4B5562H-STD

ACL
Reference: ACL-4B5562H-STD
Supplier Ref.: 4B5562H-STD

Price: €84.17 Tax included
In stock Shipped tomorrow from our warehouse
Available in store (Montpellier)
Earn 84 loyalty points
Carbon footprint: 2 kg CO₂

ACL Race Series 4B5562H-STD connecting rod bushes with a trimetal structure are designed for Volkswagen and Audi EA888 engines. They guide the connecting rod top ends on the crankshaft journals and operate using the oil film that separates the moving surfaces. Part number 4B5562H-STD corresponds to the standard (STD) size.

The trimetal design combines a high-strength steel backing, a copper-lead-tin anti-friction layer, a nickel barrier, and a lead-tin-copper surface coating. This structure helps withstand the stresses of the lower engine while maintaining the conditions necessary for engine oil film formation.

The H version in STD size is intended for mounting while maintaining the nominal size of the crankshaft journals. To determine the effective oil clearance, the bearings must be measured once installed and the caps tightened to the specified torque.


Technical Specifications

  • Type: Connecting rod bushes
  • Manufacturer: ACL
  • Range: ACL Race Series
  • Design: trimetal, steel backing, and copper-lead-tin anti-friction plies
  • ACL Material: F781 (Race Series connecting rod bushes)
  • Manufacturer Part Number: 4B5562H-STD
  • Dimension: standard dimension (STD)
  • Version: H
  • Main engines: EA888
  • Manufacturers: Volkswagen | Audi
  • Rod journal diameter (nominal dimension): 47.758 to 47.778 mm
  • Connecting rod top end bore: 50.6 to 50.619 mm
  • Maximum thickness at the top: 1.405 mm
  • Maximum width: 17.4 mm

Engine models compatible with ACL 4B5562H-STD bearings

This part number applies specifically to the following engine models in the described family: EA888 | EA888 GEN3 | BYT | BZB | CABA | CABB | CGYA | CADA | CAEA | CAEB | CAED | CAWA | CAWB | CBFA | CCTA | CCTB | CCZA | CCZB | CCZC | CCZD. The list of engine codes and applications must be verified against the exact mounting configuration before ordering.

Mounting Recommendations

Mounting Recommendation: Measure the crankshaft journals with a micrometer, inspect the connecting rod bearings, and check the operating clearance after tightening the connecting rod caps in accordance with the engine manufacturer’s specifications.

ACL Race Series develops engine bearings for competition and tuning applications, featuring precision manufacturing, shell thickness control, and a trimetal design focused on mechanical resistance and precise control of operating clearances.

  • Thickness in mm
    1,41
  • Width in mm
    17,40
  • Engine code
    EA855 - 2.5L 20V
    EA855 EVO - 2.5L 20V
    EA888 - 1.8L 16V
    EA888 - 2.0L 16V
    EA888 GEN3 - 2.0L 16V
  • Make (Engine)
    Audi
    Volkswagen
  • Rod Journal Diameter in mm
    47,76
    47,78
  • Max. connecting rod bore in mm
    50,62
  • Min. connecting rod bore in mm
    50,60

16 other products in the same category:

Customers who bought this product also bought: