ACL Race Series Connecting Rod Bushes - Volvo B230, B200, and B204 - STD - 4B2726H-STD
ACL Race Series 4B2726H-STD connecting rod bushes with a trimetal structure are designed for Volvo B230, B200, and B204 engines. Installed in the connecting rod top ends, they serve as the interface between the connecting rod and the crankpin. Their selection determines the operating clearance and oiling of the lower engine assembly. Part number 4B2726H-STD corresponds to the standard size (STD).
ACL Race Series trimetal technology consists of a steel base and a copper-lead-tin layer protected by a nickel barrier. The assembly is completed by a surface layer designed to enhance bearing performance under load and resistance to seizure.
The H version in STD size is intended for mounting while maintaining the nominal size of the crankshaft journals. To determine the actual oil clearance, measure the bearings once they are installed and the caps are tightened to the specified torque.
Technical Specifications
- Type: Connecting rod bush
- Manufacturer: ACL
- Range: ACL Race Series
- Design: trimetal, steel backing, and copper-lead-tin anti-friction plies
- ACL Material: F781 (Race Series connecting rod bushes)
- Manufacturer Part Number: 4B2726H-STD
- Dimension: standard dimension (STD)
- Version: H
- Main engines: B230, B200, and B204
- Manufacturers: Volvo
- Rod journal diameter (nominal dimension): 48.984 to 49.004 mm
- Connecting rod top end bore: 51.999 to 52.014 mm
- Maximum thickness at the top: 1.486 mm
- Maximum width: 24 mm
Engine models compatible with ACL 4B2726H-STD bearings
The engine models listed for this set include: B234F | B230 | B200 | B204 | B234.
Mounting Recommendations
Mounting recommendation: Check the surface condition of the crankshaft, measure the diameters of the crankpins, and measure the oil clearance with the half-bearings installed. Follow the engine tightening procedure.
ACL Race Series develops engine bearings for competition and tuning, featuring precision manufacturing, shell thickness control, and a trimetal design focused on mechanical resistance and precise control of operating clearances.
-
Thickness in mm1,49
-
Width in mm24,00
-
Engine codeB230 - 2.3L 8V
B234F - 2.3L 16V -
Make (Engine)Volvo
-
Rod Journal Diameter in mm48,98
49,00 -
Max. connecting rod bore in mm52,01
-
Min. connecting rod bore in mm52,00