ACL Race Series Connecting Rod Bushes - Honda and Acura A18A, ES, and A20A - 0.025 mm - 4B1946H-.025

ACL
Reference: ACL-4B1946H-0025
Supplier Ref.: 4B1946H-.025

Price: €58.80 Tax included
Supplier stock Shipped between 2026-11-26 and 2026-11-30 from our warehouse
Unavailable in store (Montpellier)
Earn 58 loyalty points
Carbon footprint: 3 kg CO₂

ACL Race Series 4B1946H-.025 trimetal connecting rod bushes are designed for Honda and Acura A18A, ES, and A20A engines. Installed in the connecting rod top ends, they serve as the interface between the connecting rod and the crankshaft. Their selection determines the operating clearance and oiling of the lower engine. Part number 4B1946H-.025 corresponds to a thickness of 0.025 mm.

ACL Race Series trimetal technology consists of a steel bracket and a copper-lead-tin layer protected by a nickel barrier. The assembly is completed by a surface layer designed to enhance bearing performance under load and resistance to seizure.

This 0.025 mm version allows you to select bearings that match the actual condition of the crankshaft journals. The selection should be based on crankshaft measurements and not solely on the engine’s preparation level.


Technical Specifications

  • Type: connecting rod bushes
  • Manufacturer: ACL
  • Range: ACL Race Series
  • Design: trimetal, steel backing, and copper-lead-tin anti-friction plies
  • ACL Material: F781 (Race Series connecting rod bushes)
  • Manufacturer part number: 4B1946H-.025
  • Thickness: 0.025 mm
  • Version: H
  • Main engines: A18A, ES, and A20A
  • Manufacturers: Honda | Acura

Engine models compatible with ACL 4B1946H-.025 bearings

The engine models listed for this set include: B16A | B17A | B18A1 | B18B1 | B20B | A18A | ES | A20A | B17A1 | B18B2 | B18A | B20A | F18B | F20B | A20A1 | A20A2 | A20A3 | A20A4 | B16A1 | B16A2 | B16A3 | B16A4 | B16A6.

Mounting Recommendations

Mounting Recommendation: Check the surface condition of the crankshaft, measure the diameters of the crankpins, and measure the oil clearance with the bearing halves installed. Follow the engine tightening procedure. A replacement size should only be installed if the corresponding machining has been performed.

ACL Race Series develops engine bearings for competition and tuning applications, featuring precision manufacturing, shell thickness control, and a trimetal design focused on mechanical resistance and precise control of operating clearances.

  • Thickness in mm
    1,52
  • Width in mm
    19,50
  • Engine code
    B16A - 1.6L 16V
    B17A - 1.7L 16V
    B18A1/B1 - 1.8L 16V
    B20B - 2.0L 16V
  • Make (Engine)
    Acura
    Honda
  • Rod Journal Diameter in mm
    44,96
    44,98
  • Max. connecting rod bore in mm
    48,02
  • Min. connecting rod bore in mm
    48,00

16 other products in the same category: