ACL Race Series Connecting Rod Bushes - Ford and Mazda EcoBoost - STD - 4B8172HX-STD
ACL Race Series 4B8172HX-STD connecting rod bushes with a trimetal construction are designed for Ford and Mazda EcoBoost engines. In the lower engine, they allow the connecting rods to rotate around the crankpins while supporting the loads transmitted by the pistons. Part number 4B8172HX-STD corresponds to the standard size (STD).
Developed to withstand the stresses of engine tuning, ACL Race Series trimetal bearings combine a steel backing, a copper-lead-tin alloy, a nickel barrier, and an anti-friction layer. Their radial runout helps maintain the oil film when the bearing seats undergo deformation during operation.
The HX suffix identifies a version designed to adjust the oil clearance. For the HX version, ACL specifies approximately 0.025 mm of additional clearance compared to an H version of the same size, on a crankshaft of corresponding sizes. The mounting must be checked after the connecting rod caps are tightened.
Technical Specifications
- Type: Connecting rod bushes
- Manufacturer: ACL
- Range: ACL Race Series
- Design: trimetal, steel backing, and copper-lead-tin anti-friction plies
- ACL Material: F781 (Race Series connecting rod bushes)
- Manufacturer Part Number: 4B8172HX-STD
- Dimension: standard dimension (STD)
- Version: HX, increased oil clearance compared to the corresponding H version
- Main engines: EcoBoost
- Manufacturers: Ford | Mazda
- Rod journal diameter (nominal dimension): 51.98 to 52 mm
- Connecting rod top end bore: 55.021 to 55.034 mm
- Maximum thickness at the top: 1.487 mm
- Maximum width: 17 mm
Engine types compatible with ACL 4B8172HX-STD bearings
The engine types listed for this set include: EcoBoost | L3-VDT.
Mounting Recommendations
Mounting recommendation: Before assembly, check the geometry of the connecting rod top ends, the actual dimension of the crankshaft journals, and the final oil clearance. Apply the torque values and follow the tightening sequence specified for the engine.
ACL Race Series develops engine bearings for competition and performance applications, featuring precision manufacturing, shell thickness control, and a trimetal design optimized for mechanical resistance and precise control of operating clearances.
-
Thickness in mm1,49
-
Width in mm17,00
-
Engine codeEcoBoost - 2.0L 16V
EcoBoost - 2.3L 16V -
Make (Engine)Ford
Mazda -
Rod Journal Diameter in mm51,98
52,00 -
Max. connecting rod bore in mm55,03
-
Min. connecting rod bore in mm55,02