ACL Race Series Connecting Rod Bushes - Nissan RB30 and RB30ET - STD - 6B2390H-STD

ACL
Reference: ACL-6B2390H-STD
Supplier Ref.: 6B2390H-STD

Price: €83.00 Tax included
Supplier stock Shipped between 2026-11-26 and 2026-11-30 from our warehouse
Unavailable in store (Montpellier)
Earn 83 loyalty points
Carbon footprint: 2.34 kg CO₂

ACL Race Series 6B2390H-STD connecting rod bushes with a trimetal construction are designed for Nissan RB30 and RB30ET engines. They guide the connecting rod top ends over the crankshaft journals and operate using the oil film that separates the moving surfaces. Part number 6B2390H-STD corresponds to the standard size (STD).

The trimetal design combines a high-resistance steel backing, a copper-lead-tin anti-friction ply, a nickel barrier, and a lead-tin-copper surface trim. This structure helps withstand the stresses of the lower engine while maintaining the conditions necessary for oil film formation.

The H version in STD size is intended for mounting while maintaining the nominal size of the crankshaft journals. To determine the effective oil clearance, the bearings must be measured once installed and the caps tightened to the prescribed torque.


Technical Specifications

  • Type: Connecting rod bushes
  • Manufacturer: ACL
  • Range: ACL Race Series
  • Design: trimetal, steel backing, and copper-lead-tin anti-friction plies
  • ACL Material: F781 (Race Series connecting rod bushes)
  • Manufacturer part number: 6B2390H-STD
  • Dimension: standard dimension (STD)
  • Version: H
  • Main engines: RB30 and RB30ET
  • Manufacturers: Nissan
  • Rod journal diameter (nominal dimension): 49.961 to 49.974 mm
  • Connecting rod top end bore: 53 to 53.011 mm
  • Maximum thickness at the top: 1.503 mm
  • Maximum width: 17.1 mm

Engine models compatible with ACL 6B2390H-STD bearings

The engine models listed for this set include: RB30 | VG30DETT | RB30ET | VG30E | VG30ET | VG30I | VG33E | VG30DE.

Mounting Recommendations

Mounting recommendation: Measure the crankshaft journals with a micrometer, inspect the connecting rod bearings, and check the operating clearance after tightening the connecting rod caps in accordance with the engine manufacturer’s specifications.

ACL Race Series develops engine bearings for racing and tuning applications, featuring precision manufacturing, shell thickness control, and a trimetal design focused on mechanical resistance and precise control of operating clearances.

  • Thickness in mm
    1,50
  • Width in mm
    17,10
  • Engine code
    RB30 - 3.0L 12V
    VG30DETT - 3.0L 24V
  • Make (Engine)
    Nissan
  • Rod Journal Diameter in mm
    49,96
    49,97
  • Max. connecting rod bore in mm
    53,01
  • Min. connecting rod bore in mm
    53,00

16 other products in the same category: