ACL Race Series Connecting Rod Bushes - Nissan TB42, TB45, and TB48 - STD - 6B2955HX-STD
The ACL Race Series 6B2955HX-STD connecting rod bushes, featuring a trimetal construction, are designed for Nissan’s TB42, TB45, and TB48 engines. They guide the connecting rod top ends over the crankpins and operate using the oil film that separates the moving surfaces. Part number 6B2955HX-STD corresponds to the standard size (STD).
The trimetal design combines a high-resistance steel backing, a copper-lead-tin anti-friction layer, a nickel barrier, and a lead-tin-copper surface coating. This structure helps withstand the stresses of the lower engine while maintaining optimal conditions for oil film formation.
The HX suffix identifies a version designed to adjust the oil clearance. For the HX version, ACL specifies approximately 0.025 mm of additional clearance compared to an H version of the same size, on a crankshaft of corresponding sizes. The mounting must be checked after tightening the connecting rod caps.
Technical Specifications
- Type: connecting rod bushes
- Manufacturer: ACL
- Range: ACL Race Series
- Design: trimetal, steel backing, and copper-lead-tin anti-friction plies
- ACL Material: F781 (Race Series connecting rod bushes)
- Manufacturer part number: 6B2955HX-STD
- Specification: standard specification (STD)
- Version: HX, increased oil clearance compared to the corresponding H version
- Main engines: TB42, TB45, and TB48
- Manufacturers: Nissan
- Rod journal diameter (nominal dimension): 56.913 to 56.926 mm
- Connecting rod top end bore: 59.987 to 60 mm
- Maximum thickness at the top: 1.499 mm
- Maximum width: 26.1 mm
Engine models compatible with ACL 6B2955HX-STD bearings
The engine models listed for this set include: TB42 | TB45 | TB48.
Mounting Recommendations
Mounting recommendation: Measure the crankshaft journals with a micrometer, inspect the connecting rod bearings, and check the operating clearance after tightening the connecting rod caps in accordance with the engine manufacturer’s specifications.
ACL Race Series develops engine bearings for competition and tuning applications, featuring precision manufacturing, shell thickness control, and a trimetal design focused on mechanical strength and precise control of operating clearances.
-
Thickness in mm1,50
-
Width in mm26,10
-
Make (Engine)Nissan
-
Rod Journal Diameter in mm56,91
56,93 -
Max. connecting rod bore in mm60,00
-
Min. connecting rod bore in mm59,99