ACL Race Series Connecting Rod Bushes - Nissan SR20DE - STD - 4B2960H-STD
ACL Race Series 4B2960H-STD trimetal connecting rod bushes are designed for Nissan SR20DE engines. In the lower engine, they allow the connecting rods to rotate around the crankpins while supporting the loads transmitted by the pistons. The part number 4B2960H-STD corresponds to the standard size (STD).
Developed to withstand the stresses of engine tuning, ACL Race Series trimetal connecting rod bearings combine a steel bracket, a copper-lead-tin alloy, a nickel barrier, and an anti-friction layer. Their radial runout helps maintain the oil film when the bearing seats undergo deformation during operation.
The H version in STD size is intended for mounting while maintaining the nominal size of the crankshaft journals. To determine the effective oil clearance, measure the bearings once they are installed and the caps are tightened to the specified torque.
Technical Specifications
- Type: Connecting rod bush
- Manufacturer: ACL
- Range: ACL Race Series
- Design: trimetal, steel backing, and copper-lead-tin anti-friction plies
- ACL Material: F781 (Race Series connecting rod bushes)
- Manufacturer part number: 4B2960H-STD
- Dimension: standard dimension (STD)
- Version: H
- Main engines: SR20DE
- Manufacturers: Nissan
- Rod journal diameter (nominal dimension): 47.956 to 47.974 mm
- Connecting rod top end bore: 51 to 51.013 mm
- Maximum thickness at the top: 1.503 mm
- Maximum width: 17.1 mm
Engine models compatible with ACL 4B2960H-STD bearings
The engine models listed for this set include: SR20DE | SR20DET.
Mounting Recommendations
Mounting recommendation: Before assembly, check the geometry of the connecting rod top ends, the actual dimensions of the crankshaft journals, and the final oil clearance. Apply the torque values and follow the tightening sequence specified for the engine.
ACL Race Series develops engine bearings for competition and performance tuning, featuring precision manufacturing, shell thickness control, and a trimetal design focused on mechanical resistance and precise control of operating clearances.
-
Thickness in mm1,50
-
Width in mm17,10
-
Engine codeSR20DE - 2.0L 16V
SR20DET - 2.0L 16V -
Make (Engine)Nissan
-
Rod Journal Diameter in mm47,96
47,97 -
Max. connecting rod bore in mm51,01
-
Min. connecting rod bore in mm51,00