ACL Race Series Connecting Rod Bushes - Ford and Mazda ECOBOOST - 0.25 mm - 4B8172H-.25
ACL Race Series 4B8172H-.25 trimetal connecting rod bushes are designed for Ford and Mazda ECOBOOST engines. These half-bearings help guide the connecting rod top end and form the oil film essential for bearing operation. Part number 4B8172H-.25 corresponds to a thickness of 0.25 mm.
The trimetal structure of the ACL Race Series bearings features a high-resistance steel base, a copper-lead-tin functional ply, and a surface finish based on a lead-tin-copper alloy, with a nickel barrier layer in between. This design ensures mechanical strength and bearing performance under severe conditions.
This 0.25 mm size option allows you to select bearings that match the actual condition of the crankshaft journals. The selection should be based on measurements of the crankshaft and not solely on the engine’s preparation level.
Technical Specifications
- Type: Connecting rod bush
- Manufacturer: ACL
- Range: ACL Race Series
- Design: trimetal, steel backing, and copper-lead-tin anti-friction plies
- ACL Material: F781 (Race Series connecting rod bushes)
- Manufacturer part number: 4B8172H-.25
- Thickness: 0.25 mm
- Version: H
- Main engines: ECOBOOST
- Manufacturers: Ford | Mazda
Engine types compatible with ACL 4B8172H-.25 bearings
The engine types listed for this set include: ECOBOOST | L3-VDT.
Mounting Recommendations
Mounting recommendation: Select the size based on crankshaft measurements; then check the assembled bore with the bearing cap tightened to the specified torque. Bearing oiling depends on the resulting clearance. A repair size should only be installed if the corresponding machining has been performed.
ACL Race Series develops engine bearings for competition and tuning applications, featuring precision manufacturing, shell thickness control, and a trimetal design focused on mechanical resistance and control of operating clearances.
-
Thickness in mm1,63
-
Width in mm17,00
-
Engine codeEcoBoost - 2.0L 16V
EcoBoost - 2.3L 16V
MZR DISI - 2.3L 16V -
Make (Engine)Ford
Mazda -
Rod Journal Diameter in mm51,73
51,75 -
Max. connecting rod bore in mm55,03
-
Min. connecting rod bore in mm55,02