ACL Race Series Connecting Rod Bushes - Honda and Acura A18A, ES, and A20A - 0.25 mm - 4B1946H-0.25

ACL
Reference: ACL-4B1946H-025
Supplier Ref.: 4B1946H-0.25

Price: €50.00 Tax included
In stock Shipped tomorrow from our warehouse
Available in store (Montpellier)
Earn 50 loyalty points
Carbon footprint: 3 kg CO₂

ACL Race Series 4B1946H-0.25 connecting rod bushes with a trimetal construction are designed for Honda and Acura A18A, ES, and A20A engines. They guide the connecting rod top ends over the crankshaft journals and operate using an oil film that separates the moving surfaces. Part number 4B1946H-0.25 corresponds to a thickness of 0.25 mm.

The trimetal design combines a high-strength steel backing, a copper-lead-tin anti-friction layer, a nickel barrier, and a lead-tin-copper surface coating. This structure helps withstand the stresses of the lower engine while maintaining the conditions necessary for oil film formation.

This 0.25 mm version allows you to select bearings that match the actual condition of the crankshaft journals. The selection should be based on measurements of the crankshaft and not solely on the engine’s preparation level.


Technical Specifications

  • Type: connecting rod bushes
  • Manufacturer: ACL
  • Range: ACL Race Series
  • Design: trimetal, steel backing, and copper-lead-tin anti-friction plies
  • ACL Material: F781 (Race Series connecting rod bushes)
  • Manufacturer part number: 4B1946H-0.25
  • Thickness: 0.25 mm
  • Version: H
  • Main engines: A18A, ES, and A20A
  • Manufacturers: Honda | Acura

Engine models compatible with ACL 4B1946H-0.25 bearings

The engine models listed for this set include: B16A | B17A | B18A1 | B18B1 | B20B | A18A | ES | A20A | B17A1 | B18B2 | B18A | B20A | F18B | F20B | A20A1 | A20A2 | A20A3 | A20A4 | B16A1 | B16A2 | B16A3 | B16A4 | B16A6.

Mounting Recommendations

Mounting recommendation: Measure the crankshaft journals with a micrometer, inspect the connecting rod bearings, and check the operating clearance after tightening the connecting rod caps in accordance with the engine manufacturer’s specifications. A replacement size should only be installed if the corresponding machining has been performed.

ACL Race Series develops engine bearings for competition and tuning applications, featuring precision manufacturing, shell thickness control, and a trimetal design optimized for mechanical resistance and precise control of operating clearances.

  • Thickness in mm
    1,63
  • Width in mm
    19,50
  • Engine code
    B16A - 1.6L 16V
    B17A - 1.7L 16V
    B18A1/B1 - 1.8L 16V
    B20B - 2.0L 16V
  • Make (Engine)
    Acura
    Honda
  • Rod Journal Diameter in mm
    44,73
    44,75
  • Max. connecting rod bore in mm
    48,02
  • Min. connecting rod bore in mm
    48,00

16 other products in the same category: