ACL Race Series Connecting Rod Bushes - Ford and Mazda DURATORQ - STD - 4B2260HX-STD

ACL
Reference: ACL-4B2260HX-STD
Supplier Ref.: 4B2260HX-STD

Price: €96.00 Tax included
Available to order Within 20 days on average.
Unavailable in store (Montpellier)
Earn 96 loyalty points
Carbon footprint: 2.34 kg CO₂

ACL Race Series 4B2260HX-STD connecting rod bushes with a trimetal construction are designed for Ford and Mazda DURATORQ engines. They guide the connecting rod top ends over the crankpins and operate using the oil film that separates the moving surfaces. Part number 4B2260HX-STD corresponds to the standard size (STD).

The trimetal design combines a high-strength steel backing, a copper-lead-tin anti-friction layer, a nickel barrier, and a lead-tin-copper surface coating. This structure helps withstand the stresses of the lower engine while maintaining the conditions necessary for oil film formation.

The HX suffix identifies a version designed to adjust the oil clearance. For the HX version, ACL specifies approximately 0.025 mm of additional clearance compared to an H version of the same size, on a crankshaft of corresponding sizes. The mounting must be checked after tightening the connecting rod caps.


Technical Specifications

  • Type: connecting rod bush
  • Manufacturer: ACL
  • Range: ACL Race Series
  • Design: trimetal, steel backing, and copper-lead-tin anti-friction plies
  • ACL Material: F781 (Race Series connecting rod bushes)
  • Manufacturer part number: 4B2260HX-STD
  • Dimension: standard dimension (STD)
  • Version: HX, increased oil clearance compared to the corresponding H version
  • Main engines: DURATORQ
  • Manufacturers: Ford | Mazda
  • Rod journal diameter (nominal dimension): 52.98 to 53 mm
  • Connecting rod top end bore: 55.996 to 56.016 mm
  • Maximum thickness at the top: 1.474 mm
  • Maximum width: 24.45 mm

Engine models compatible with ACL 4B2260HX-STD bearings

The engine models listed for this set include: DURATORQ | P4-AT.

Mounting Recommendations

Mounting recommendation: Measure the crankshaft journals with a micrometer, inspect the connecting rod bearings, and verify operating clearance after tightening the connecting rod caps in accordance with the engine manufacturer’s specifications.

ACL Race Series develops engine bearings for competition and tuning applications, featuring precision manufacturing, shell thickness control, and a trimetal design optimized for mechanical strength and precise control of operating clearances.

  • Thickness in mm
    1,47
  • Width in mm
    24,45
  • Make (Engine)
    Ford
    Mazda
  • Rod Journal Diameter in mm
    52,98
    53,00
  • Max. connecting rod bore in mm
    56,02
  • Min. connecting rod bore in mm
    56,00

16 other products in the same category: